Forums

LauterBach ICD - TRACE32 for MIPS4k

Started by mayureshsawant81 May 16, 2006
Hi all,

I have 4 boards, on one board lauterbach GUI is stable (flash contents)-
it is not running. But on other three boards it is jumping. So my client
says, the boards are ok, b'caz they are also use the same boards. So I
dont understand what is the problem? Is this really lauterbach issue?

And one more every board runs on differen Ejtag clock freq (10,25 or 5
Mhz)

Please help....

Regards,
Mayuresh


On Tue, 16 May 2006 08:12:37 -0500, "mayureshsawant81"
<mayureshsawant81@yahoo.com> wrote:

>Hi all, > >I have 4 boards, on one board lauterbach GUI is stable (flash contents)- >it is not running. But on other three boards it is jumping.
"jumping" ?? Try to be more specific.
>So my client >says, the boards are ok, b'caz they are also use the same boards. So I >dont understand what is the problem? Is this really lauterbach issue? > >And one more every board runs on differen Ejtag clock freq (10,25 or 5 >Mhz)
Do you have the right setup (RAM,CS etc). Why different JTAG speeds ? You wrote these are the same boards ? -- 42Bastian Do not email to bastian42@yahoo.com, it's a spam-only account :-) Use <same-name>@monlynx.de instead !