Forums

PowerQuicc II 8260

Started by Francesco Moscato October 4, 2006
Sorry, 

Does someone know if there is a way to install a linux-based operating
system on the following board?

SBC PowerQuicc II 8260 Wind River Board 
(with an MPC 8260 processor)


Thank you 
Francesco

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Francesco Moscato wrote:
> Sorry, > > Does someone know if there is a way to install a linux-based operating > system on the following board? > > SBC PowerQuicc II 8260 Wind River Board > (with an MPC 8260 processor) >
Start with U-boot (http://*u-boot*.sourceforge.net/) and ELDK (http://www.denx.de). U-boot supports already this board (sbc8260), so running a 2.4 or 2.6 should not be a big problem. -- willy
Willy Jacobs ha scritto:
> Francesco Moscato wrote: >> Sorry, >> Does someone know if there is a way to install a linux-based operating >> system on the following board? >> >> SBC PowerQuicc II 8260 Wind River Board (with an MPC 8260 processor) >> > Start with U-boot (http://*u-boot*.sourceforge.net/) and ELDK > (http://www.denx.de). > U-boot supports already this board (sbc8260), so running a 2.4 or 2.6 > should not be a big problem. >
tks .. i will try ;)