Simulating Microblaze Core + C Code + VHDL defined peripherical

Started by Xabier Iturbe November 23, 2006
Iam designing a system consisting of:

Microblaze Core
RS232 Uart Lite
SPI controller

The SPI controller will communicate with an ADC converter placed
outside of FPGA. In order to modelize the system, previous to implement
it, I have included an VHDL model of the converter.

I don=B4t know what is the best way to simulate the system whole..
ModelSim is a harware simulator and I think that could be very hard to
simulate the system in this way: The C code generates a very long
simulation, in which is very difficult to distinguish the correct
execution of it.

Thank you.

_______________________________________________________________________

 	Xabier Iturbe
	Area de Electr=F3nica
 	IKERLAN
	P=BA J. M. Arizmendiarrieta, 2
	20500 Mondrag=F3n (Gipuzkoa)
 	Tel.:   +34 943 71 24 00 	Fax:    +34 943 79 69 44
 	E-mail: xiturbe@ikerlan.es  	http:    www.ikerlan.es
	IK4 Research Alliance
_______________________________________________________________________