Cant get eeprom emulation to work on mc9s12C32

Hi  to all.
I  can't seem to get the eeprom emulation on a mc9s12C32 to work. I
have the App note AN2303/D
and associated files from Freescale website  , but I am still
struggling. I am new to this processor
and have never done anything like this before , so excuse me if I am
being a bit of a "dumbo" :0(

I have created a basic project using the "Processor Expert" function.
Xtal freq is 10Mhz , internal freq is 25Mhz , with the pll enabled. I
have created a 1ms timer with a "bean" and it is spot on , so I assume
the internal frequency is correct. I have disabled the timer while I'm
trying to get the eeprom stuff working.

 I have included the files that come with the app note in my project.
The project compiles without errors , but I can't seem to read or
write anything to "eeprom".
I have a feeling "my" memory mapping is not correct.
The processor expert has created the following memory map:
0000 - 03FF  ----I/O
03FF-3800    ----unused
3800-3FFF   -----RAM
4000-7FFF----Flash
7FFF-C000---unused
C000-FEFF---flash
FF00-FF0F----I/O
FF10-FFFF---Flash

How should I set up the parameters in the EE_emulation.h file. At the
moment I am not worried
about using interrupts during programming. I would just like to get
the simplest method working.
Any help would be appreciated. Remember I'm new to this , so go easy :
0/