digikey list price 1.52USD, but not available, any info if any Atmel disti has this MCU in stock? Antti
AT90USB82 availability
Started by ●May 24, 2007
Reply by ●May 24, 20072007-05-24
On May 24, 2:14 am, Antti <Antti.Luk...@googlemail.com> wrote:> digikey list price 1.52USD, but not available, any info if any Atmel > disti has this MCU in stock? > > AnttiDigikey shows target shipping date in 1 week, but the AT90USB162 is three weeks past due.
Reply by ●May 24, 20072007-05-24
> digikey list price 1.52USD, but not available, any info if any Atmel > disti has this MCU in stock? >Yes, They don't! -- Best Regards, Ulf Samuelsson This is intended to be my personal opinion which may, or may not be shared by my employer Atmel Nordic AB
Reply by ●May 24, 20072007-05-24
Ulf Samuelsson schrieb:> > digikey list price 1.52USD, but not available, any info if any Atmel > > disti has this MCU in stock? > > > > Yes, They don't! > > -- > Best Regards, > Ulf Samuelsson > This is intended to be my personal opinion which may, > or may not be shared by my employer Atmel Nordic ABI assume that means I should use products from other vendor? or is there still hope to get usb82 or usb162 in near future? Antti
Reply by ●May 24, 20072007-05-24
Antti wrote:> Ulf Samuelsson schrieb: > >>>digikey list price 1.52USD, but not available, any info if any Atmel >>>disti has this MCU in stock? >>> >> >>Yes, They don't! >> >>-- >>Best Regards, >>Ulf Samuelsson >>This is intended to be my personal opinion which may, >>or may not be shared by my employer Atmel Nordic AB > > > I assume that means I should use products from other vendor? > or is there still hope to get usb82 or usb162 in near future?Latest Atmel PDF says "I - Device under introduction,", so you should be able to get samples ? Normally, the AT90USB162 would be first out the gate, so I'd chase samples of that part number... -jg
Reply by ●May 25, 20072007-05-25
Jim Granville schrieb:> Antti wrote: > > > Ulf Samuelsson schrieb: > > > >>>digikey list price 1.52USD, but not available, any info if any Atmel > >>>disti has this MCU in stock? > >>> > >> > >>Yes, They don't! > >> > >>-- > >>Best Regards, > >>Ulf Samuelsson > >>This is intended to be my personal opinion which may, > >>or may not be shared by my employer Atmel Nordic AB > > > > > > I assume that means I should use products from other vendor? > > or is there still hope to get usb82 or usb162 in near future? > > > Latest Atmel PDF says "I - Device under introduction,", so you should > be able to get samples ? > Normally, the AT90USB162 would be first out the gate, so I'd chase > samples of that part number... > > -jgUSB82 Q3 :( Antti
Reply by ●May 28, 20072007-05-28
>> I assume that means I should use products from other vendor? >> or is there still hope to get usb82 or usb162 in near future? > > > Latest Atmel PDF says "I - Device under introduction,", so you should > be able to get samples ? > Normally, the AT90USB162 would be first out the gate, so I'd chase > samples of that part number... >That is sound advice. -- Best Regards, Ulf Samuelsson This is intended to be my personal opinion which may, or may not be shared by my employer Atmel Nordic AB
Reply by ●June 2, 20072007-06-02
On May 28, 7:27 am, "Ulf Samuelsson" <u...@a-t-m-e-l.com> wrote:> >> I assume that means I should use products from other vendor? > >> or is there still hope to get usb82 or usb162 in near future? > > > Latest Atmel PDF says "I - Device under introduction,", so you should > > be able to get samples ? > > Normally, theAT90USB162would be first out the gate, so I'd chase > > samples of that part number... > > That is sound advice. > > -- > Best Regards, > Ulf Samuelsson > This is intended to be my personal opinion which may, > or may not be shared by my employer Atmel Nordic ABJust an update on the moving targets. Shipping date: was now actual at90usb162 5/1 6/29 TBD at90usb82 6/1 6/16 TBD
Reply by ●June 4, 20072007-06-04
On 3 Jun., 02:32, linnix <m...@linnix.info-for.us> wrote:> On May 28, 7:27 am, "Ulf Samuelsson" <u...@a-t-m-e-l.com> wrote: > > > >> I assume that means I should use products from other vendor? > > >> or is there still hope to get usb82 or usb162 in near future? > > > > Latest Atmel PDF says "I - Device under introduction,", so you should > > > be able to get samples ? > > > Normally, theAT90USB162would be first out the gate, so I'd chase > > > samples of that part number... > > > That is sound advice. > > > -- > > Best Regards, > > Ulf Samuelsson > > This is intended to be my personal opinion which may, > > or may not be shared by my employer Atmel Nordic AB > > Just an update on the moving targets. > > Shipping date: > > was now actual > at90usb162 5/1 6/29 TBD > at90usb82 6/1 6/16 TBDs... I was told usb162 is available in june, 6/29 is almost july :( and usb82 is coming out earlier ?? Antti
Reply by ●June 4, 20072007-06-04
On Jun 4, 12:35 am, Antti <Antti.Luk...@googlemail.com> wrote:> On 3 Jun., 02:32, linnix <m...@linnix.info-for.us> wrote: > > > > > On May 28, 7:27 am, "Ulf Samuelsson" <u...@a-t-m-e-l.com> wrote: > > > > >> I assume that means I should use products from other vendor? > > > >> or is there still hope to get usb82 or usb162 in near future? > > > > > Latest Atmel PDF says "I - Device under introduction,", so you should > > > > be able to get samples ? > > > > Normally, theAT90USB162would be first out the gate, so I'd chase > > > > samples of that part number... > > > > That is sound advice. > > > > -- > > > Best Regards, > > > Ulf Samuelsson > > > This is intended to be my personal opinion which may, > > > or may not be shared by my employer Atmel Nordic AB > > > Just an update on the moving targets. > > > Shipping date: > > > was now actual > > at90usb162 5/1 6/29 TBD > > at90usb82 6/1 6/16 TBD > > s...My feelings exactly, f...> I was told usb162 is available in june, 6/29 is almost july :( > and usb82 is coming out earlier ??That's what they say, but don't count on it.> Antti
