"linnix" <me@linnix.info-for.us> skrev i meddelandet news:1180972509.561902.246260@j4g2000prf.googlegroups.com...> On Jun 4, 12:35 am, Antti <Antti.Luk...@googlemail.com> wrote: >> On 3 Jun., 02:32, linnix <m...@linnix.info-for.us> wrote: >> >> >> >> > On May 28, 7:27 am, "Ulf Samuelsson" <u...@a-t-m-e-l.com> wrote: >> >> > > >> I assume that means I should use products from other vendor? >> > > >> or is there still hope to get usb82 or usb162 in near future? >> >> > > > Latest Atmel PDF says "I - Device under introduction,", so you >> > > > should >> > > > be able to get samples ? >> > > > Normally, theAT90USB162would be first out the gate, so I'd chase >> > > > samples of that part number... >> >> > > That is sound advice. >> >> > > -- >> > > Best Regards, >> > > Ulf Samuelsson >> > > This is intended to be my personal opinion which may, >> > > or may not be shared by my employer Atmel Nordic AB >> >> > Just an update on the moving targets. >> >> > Shipping date: >> >> > was now actual >> > at90usb162 5/1 6/29 TBD >> > at90usb82 6/1 6/16 TBD >> >> s... > > My feelings exactly, f... > >> I was told usb162 is available in june, 6/29 is almost july :( >> and usb82 is coming out earlier ?? > > That's what they say, but don't count on it. >Dont listen to "they" then , because "they" seems to be uninformed... AT90USB162 is in general sampling now (can be ordered from Atmels sample dept), but the AT90USB82 is not there yet.>> Antti >-- Best Regards, Ulf Samuelsson This is intended to be my personal opinion which may, or may not be shared by my employer Atmel Nordic AB
AT90USB82 availability
Started by ●May 24, 2007
Reply by ●June 5, 20072007-06-05
Reply by ●June 6, 20072007-06-06
On Jun 5, 2:41 pm, "Ulf Samuelsson" <u...@a-t-m-e-l.com> wrote:> "linnix" <m...@linnix.info-for.us> skrev i meddelandetnews:1180972509.561902.246260@j4g2000prf.googlegroups.com... > > > > > On Jun 4, 12:35 am, Antti <Antti.Luk...@googlemail.com> wrote: > >> On 3 Jun., 02:32, linnix <m...@linnix.info-for.us> wrote: > > >> > On May 28, 7:27 am, "Ulf Samuelsson" <u...@a-t-m-e-l.com> wrote: > > >> > > >> I assume that means I should use products from other vendor? > >> > > >> or is there still hope to get usb82 or usb162 in near future? > > >> > > > Latest Atmel PDF says "I - Device under introduction,", so you > >> > > > should > >> > > > be able to get samples ? > >> > > > Normally, theAT90USB162would be first out the gate, so I'd chase > >> > > > samples of that part number... > > >> > > That is sound advice. > > >> > > -- > >> > > Best Regards, > >> > > Ulf Samuelsson > >> > > This is intended to be my personal opinion which may, > >> > > or may not be shared by my employer Atmel Nordic AB > > >> > Just an update on the moving targets. > > >> > Shipping date: > > >> > was now actual > >> > at90usb162 5/1 6/29 TBD > >> > at90usb82 6/1 6/16 TBD > > >> s... > > > My feelings exactly, f... > > >> I was told usb162 is available in june, 6/29 is almost july :( > >> and usb82 is coming out earlier ?? > > > That's what they say, but don't count on it. > > Dont listen to "they" then , because "they" seems to be uninformed... > AT90USB162 is in general sampling now (can be ordered from Atmels > sample dept), but the AT90USB82 is not there yet. >Good news for some: 162 TQFP is available at digikey now. Bad news for others (and me): 162 QFN is not ready until Sept. At this rate, 82 QFN (my production target) might not be ready until next year.
