PDIUSB12,non sense Interrupt value

Started by blisca September 7, 2007
Hi,in my "self made educational board" using a PDIUSB12 and a 9s12e64(HC12
family) i found that sometimes the Irq from the D12 has a value of 0x0003 or
0x00C3.
That lowest nibble having value 3 sounds like a nonsense because it means
that bit 0(indicating CTRL_OUT_INTERRUPT) and bit 1(indicating
CTRL_IN_INTERRUPT)are both set.
The connections are good,in fact if i send commands to set oscillator out or
soft-connect everything looks working.
I tried to send the same message after registration with name diegotrex,it
does'nt appear,so i apologize if later 2 almost identical threads will
appear.

Thanks to you all

Diego