Forums

Problem connecting to VxWorks Target Agent

Started by HelenJ October 21, 2007
Hi,

I have problems connecting/pinging the MVME167 target:

-> ifShow
sn (unit number 0):
 
Flags: (0x63) UP BROADCAST ARP RUNNING  
Internet address: 150.12.1.240 
Broadcast address: 150.12.255.255 
Netmask 0xffff0000 Subnetmask 0xffff0000 
Ethernet address is 00:00:4b:0b:b3:a8 
Metric is 0 
Maximum Transfer Unit size is 1500 
11 packets received; 4 packets sent 
0 input errors; 0 output errors 
0 collisions 

lo (unit number 0):

Flags: (0x69) UP LOOPBACK ARP RUNNING  
Internet address: 127.0.0.1
Netmask 0xff000000 Subnetmask 0xff000000 
Ethernet address is 00:00:4b:0b:b3:a8 
Maximum Transfer Unit size is 4096
0 packets received; 0 packets sent 
0 input errors; 0 output errors 
0 collisions 

value = 18 = 0x12

-> Cannot register service: RPC: Timed out
unable to register  (WINDVIEW, WINDVIEW_VERS_CURRENT, udp).


The target doesn't reply even though the packets sent/received entries as
shown by "ifShow" do change when I ran "ping" from the host.

Any hint would be greatly appreciated.

Thanks,
Helen