Forums

Fault finding on an S3C44BOX ARM7 application

Started by iMac November 2, 2007
Hi 

I have an application with a Samsung S3C44BOX that will not start. It have
start two times after "latching" with the supply but else it's dead.. I
have conneced a DIY wiggler JTAG and embest PC sw it finds the uP. I can
do a test with the embest sw "Target test" and it will not work..  I'm not
shure if I have set the right ram start adress. The "register read" seem to
work and list a "value" that some is the same as default and some differs.
So is there someone that can help me with the "target test" ram start
adress on the S3C44BOX?