gnuarm toolchain older version?

Hi, 
I'm searching for an older version (gcc 3.3.2) of the gnuarm
(www.gnuarm.org) toolchain for a 32 bit Linux host system. 

I haven't found it at the homepage, does anyone have a link for me?
Thanks in advance.

Michael 
-- 
Remove the sport from my address to obtain email
www.enertex.de - Innovative Systeml�sungen der Energie- und Elektrotechnik

Michael Schuster wrote:

> Hi, 
> I'm searching for an older version (gcc 3.3.2) of the gnuarm
> (www.gnuarm.org) toolchain for a 32 bit Linux host system. 
> 
> I haven't found it at the homepage, does anyone have a link for me?
> Thanks in advance.
> 
> Michael 

FWIW, I have used these packages in some of my projects; search for
these filenames:

zgcc-3.3.1.tar.bz2
   (cross-toolchain ix86 host, arm targets)
gentooForZaurus-0.2.2.tar.bz2
   (native arm gcc 3.3.1 included)

They are large files; if you can't find 'em, let me know and I'll
make mine avail. for dl for a short while.

Regards,

Michael

On Sat, 08 Dec 2007 16:30:14 +0100, Michael Schuster
<schusterSoccer@enertex.de> wrote:

>Hi, 
>I'm searching for an older version (gcc 3.3.2) of the gnuarm
>(www.gnuarm.org) toolchain for a 32 bit Linux host system. 
>
>I haven't found it at the homepage, does anyone have a link for me?
>Thanks in advance.

It is fairly simple to build from source under Linux. Sources are at
http://ftp.gnu.org/gnu/gcc/

The build process used for the gnuarm binaries are listed at
http://www.gnuarm.com/support.html#build

Regards
  Anton Erasmus

Anton Erasmus wrote:

> On Sat, 08 Dec 2007 16:30:14 +0100, Michael Schuster
> <schusterSoccer@enertex.de> wrote:
> 
>>Hi,
>>I'm searching for an older version (gcc 3.3.2) of the gnuarm
>>(www.gnuarm.org) toolchain for a 32 bit Linux host system.
>>
>>I haven't found it at the homepage, does anyone have a link for me?
>>Thanks in advance.
> 
> It is fairly simple to build from source under Linux. Sources are at
> http://ftp.gnu.org/gnu/gcc/
> 
> The build process used for the gnuarm binaries are listed at
> http://www.gnuarm.com/support.html#build
> 
> Regards
>   Anton Erasmus
Ok, 
I will have a closer look at the verison (i have a windows version here) and
perhaps recompile or come back to the poster before

Michael 
-- 
Remove the sport from my address to obtain email
www.enertex.de - Innovative Systeml&#4294967295;sungen der Energie- und Elektrotechnik

You should try www.gnuarm.com.  That is a separate site that provides
the same files as gnuarm.org, but also provides the older versions as
well.  Actually, I shouldn't say it has the same files as I have not
updated the site for versions 4.2 and 4.2.2.  I need to take care of
that!



On Dec 13, 7:46 am, Michael Schuster <schusterSoc...@enertex.de>
wrote:
> Anton Erasmus wrote:
> > On Sat, 08 Dec 2007 16:30:14 +0100, Michael Schuster
> > <schusterSoc...@enertex.de> wrote:
>
> >>Hi,
> >>I'm searching for an older version (gcc 3.3.2) of the gnuarm
> >>(www.gnuarm.org) toolchain for a 32 bit Linux host system.
>
> >>I haven't found it at the homepage, does anyone have a link for me?
> >>Thanks in advance.
>
> > It is fairly simple to build from source under Linux. Sources are at
> >http://ftp.gnu.org/gnu/gcc/
>
> > The build process used for the gnuarm binaries are listed at
> >http://www.gnuarm.com/support.html#build
>
> > Regards
> >   Anton Erasmus
>
> Ok,
> I will have a closer look at the verison (i have a windows version here) a=
nd
> perhaps recompile or come back to the poster before
>
> Michael
> --
> Remove the sport from my address to obtain emailwww.enertex.de- Innovative=
 Systeml=F6sungen der Energie- und Elektrotechnik