Hello, I am new to this forum, so I apologize if there is already a similar post. I am looking for a device that I can drive a 5.7" LCD panel from the VGA output of a PC. I don't have specifics on what is required for the LCD, but most of the LCD controllers I have found support high resolutions, and have a lot of extra features that I don't really need. I am looking for something barebones and low cost. All said and done for around $150. The closest I have found is this kit from earthLCD.com - http://store.earthlcd.com/OF-5-7-VGA-NTSC?sc=7&category=445 Any help would be greatly appreciated. Ryan
VGA input LCD controller
Started by ●March 12, 2008
Reply by ●March 12, 20082008-03-12
On Mar 12, 3:46=A0pm, "RHarrison" <rharri...@oes-inc.com> wrote:> I am looking for a device that I can drive a 5.7" LCD panel from the VGA > output of a PC. I don't have specifics on what is required for the LCD,Unfortunately without those specifics you have little chance of finding one. They're not wholly generic, so you need to know what LCD you intend to drive. EarthLCD's price is about what you can expect to pay for small quantities of a small VGA-input monitor kit. At 1000s you can probably find them around the $120-150 mark.