Problem creating the ML403 project using Xilinx tool

Hi Guys,

I am new to Xilinx tools. I am facing some problem while creating the
"Base system Builder project" for ML403 Rev B board.

The steps as follows:
1. I have downloaded the "ml403_emb_ref_ppc_81.zip" from Xilinx
website.
2. I have used the tools EDK10.SP2 and ISE10.1SP4.

Problem:
When I am creating the base system builder project.  I am able to see
the UART_LITE, XPS_UARTLITE, ETHERNETLITE, XPS_ETHERNETLITE

How can I get the actual devices like OPB_ETHERNET,
PLB_ETHERNET..different options like NO DMA, Scattered DMA..etc

Please Help me on this.

--
Naresh Bhat

> Hi Guys,
>
> I am new to Xilinx tools. I am facing some problem while creating the
> "Base system Builder project" for ML403 Rev B board.
>
> The steps as follows:
> 1. I have downloaded the "ml403_emb_ref_ppc_81.zip" from Xilinx
> website.
> 2. I have used the tools EDK10.SP2 and ISE10.1SP4.
>
> Problem:
> When I am creating the base system builder project.  I am able to see
> the UART_LITE, XPS_UARTLITE, ETHERNETLITE, XPS_ETHERNETLITE
>
> How can I get the actual devices like OPB_ETHERNET,
> PLB_ETHERNET..different options like NO DMA, Scattered DMA..etc


You can download IP from the Xilinx WEB site.  I think the full Ethernet 
costs a few dollars, but you can always get evaluation licenses.


-- 
Regards,
Richard.

+ http://www.FreeRTOS.org & http://www.FreeRTOS.org/shop
17 official architecture ports, more than 6000 downloads per month.

+ http://www.SafeRTOS.com
Certified by T�V as meeting the requirements for safety related systems.