xc68hc711

Started by barnices November 23, 2006
Pardon by the language
I use a translator
Greetings
I want to program "eeprom" of device.
I have looked for in "Web" and nonencounter the "data sheet" of device
Device is a "XC68HC711" but in a packed "TQFP 100"
I program without problems the devices "MC68hC11E1 and E9
I need "the pins description"
to connect "pins" to the programmer
thanks
barnices wrote:
> Pardon by the language
> I use a translator

That is fine. (No hay de que.)

> Greetings
> I want to program "eeprom" of device.
> I have looked for in "Web" and nonencounter the "data sheet" of device
> Device is a "XC68HC711" but in a packed "TQFP 100"

The designation beginning with "X" instead of "M" simply means
that this was a pre-production device, and may not meet
all manufacturing specificaitions.

(La designacion que empieza con la <> en vez de <>
solo significa que se ha producido antes que produccion,
y que posiblemente no tiene exactamenta las caracteristicas
que quedan en el libro.)

> I program without problems the devices "MC68hC11E1 and E9
> I need "the pins description"
> to connect "pins" to the programmer
> thanks

I haven't heard of a device like that in a TQFP 100. But if
you can find a description of an MC68HC711 which is in that
package, it is almost surely the same.

(No he oido de uno en TQFP 100. Pero si puede encontrar
las detallas MC68HC11 como ese que tiene, probablemente
sirve por lo mismo.)

Mike
--
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled bits.
You have found the bank of Larn.
I can explain it for you, but I can't understand it for you.
I speak only for myself, and I am unanimous in that!
Thanks Mike

Nonwise the one of "x" is equal to "m"
it will begin to look for with this new information
also for my but the rare thing he is the packed
thanks again
Please supply the _complete_ part number. You have omitted the
subfamily and package designations.
Yes, I understand that the package is TQFP100 but that doesn't tell me
what the sub-family is.

Best wishes,

Bob Smith

barnices wrote:
> Pardon by the language
> I use a translator
> Greetings
> I want to program "eeprom" of device.
> I have looked for in "Web" and nonencounter the "data sheet" of device
> Device is a "XC68HC711" but in a packed "TQFP 100"
> I program without problems the devices "MC68hC11E1 and E9
> I need "the pins description"
> to connect "pins" to the programmer
> thanks
Thanks Bob
The _complete_ part number is :
-------------XC68HC711 -----------
-------------KG20CPU4-------------
--------------OH86A---------------
-------------HZHR9830-------------
Greetings
Greetings...
I Upload the images of device in photos section.
it is possible that the allocation of pins is equivalent to a package
QFP of less pins ?
thanks