Forums

indication for complete data transmission to USB host

Started by Manisha March 4, 2006
Hi all,

Thanks for helping me in solving the issue regarding polling for reception
of data.

now, i am stuck in an other problem. i want an indication whenever my USB
data gets transmitted succesfully to the host. in Atmel they provide one
TXCOMP bit which is set whenever the USB host receives any data and
acknowledges for the same. however, in lpc i have only TxENDPKT bit which
indicates only transfer of data to the endpoint FIFO. i want indication for
complete transfer.

can anyone help me in this regard?

Thanks for going through the problem.

regrads
Manisha

The information contained in this electronic message and any attachments to this
message are intended for the exclusive use of the addressee(s)and may contain
confidential or privileged information. If you are not the intended recipient,
please notify the sender or administrator@admi...

An Engineer's Guide to the LPC2100 Series

i think the problem i stated lately can be solved by checking USB Endpoint
Interrupt Status register (0xE009 0030).

any suggestion from your side will be helpful for me.

regards
Manisha.

-----Original Message-----
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...]On Behalf
Of Manisha
Sent: Saturday, March 04, 2006 5:53 PM
To: lpc2000@lpc2...
Subject: [lpc2000] indication for complete data transmission to USB host
	Hi all,

Thanks for helping me in solving the issue regarding polling for reception
of data.

now, i am stuck in an other problem. i want an indication whenever my USB
data gets transmitted succesfully to the host. in Atmel they provide one
TXCOMP bit which is set whenever the USB host receives any data and
acknowledges for the same. however, in lpc i have only TxENDPKT bit which
indicates only transfer of data to the endpoint FIFO. i want indication for
complete transfer.

can anyone help me in this regard?

Thanks for going through the problem.

regrads
Manisha

The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s)and may
contain confidential or privileged information. If you are not the intended
recipient, please notify the sender or administrator@admi...
	Yahoo! Groups Links
	The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s)and may
contain confidential or privileged information. If you are not the intended
recipient, please notify the sender or administrator@admi...