Forums

LPC2103 gotcha's

Started by dsidlauskas1 April 10, 2006
I am about to begin a small project using the LPC2103 on an Olimex
header board. I'm familiar with the LPC2138 and was wondering if there
are any gotcha's in going from the '38 to the 03'. I'm assuming the
parts are very much alike except for the memory size and number of pins.

Thanks in advance,

Dave Sidlauskas

An Engineer's Guide to the LPC2100 Series

I has split supply 3V3 and 1V8. Check two SOT223 at this photo:
http://www.olimex.com/dev/images/lpc-h2103-back.jpg

Marko

dsidlauskas1 wrote:

> I am about to begin a small project using the LPC2103 on an Olimex
> header board. I'm familiar with the LPC2138 and was wondering if there
> are any gotcha's in going from the '38 to the 03'. I'm assuming the
> parts are very much alike except for the memory size and number of pins.
>
> Thanks in advance,
>
> Dave Sidlauskas
> SPONSORED LINKS
> Microcontrollers
>
> Microprocessor
>
> Intel microprocessors
> >.
>