Forums

How to make a writter board to LPC2000 or AT91SAM7 ?

Started by Eduardo Jedliczka July 4, 2006
Greetings,

I have a little experience with 8051 family, so Im really new user of ARM
microcontrollers.

I see a lot of debugger or developper boards to ARM7 mc in Net, but some is
not disponible in Brazil, or very expensive (between USD 450 and USD 1700).

Maybe, anyone have a diagram to assemble a board with this function (using
PHILIPS LPC2000 software).

Thanks,

Eduardo Jedliczka
Brazil.

An Engineer's Guide to the LPC2100 Series

Em Ter 04 Jul 2006 13:33, Eduardo Jedliczka escreveu:
> Greetings,
>
> I have a little experience with 8051 family, so Im really new user of ARM
> microcontrollers.
>
> I see a lot of debugger or developper boards to ARM7 mc in Net, but some is
> not disponible in Brazil, or very expensive (between USD 450 and USD 1700).
>
> Maybe, anyone have a diagram to assemble a board with this function (using
> PHILIPS LPC2000 software).
>
> Thanks,
>
> Eduardo Jedliczka
> Brazil.
>
Hello Eduardo, did you take a look at the Elaxys boards?
http://www.elaxys.com.br
They are cheap, comes with Jtag cable and a CDROM with gnuarm ready to use,
its a very nice board.




Opa

Both Embedded Artists (http://www.embeddedartists.com) and Olimex
(www.olimex.com) make their schematics available on their websites.

Marcelo

Eduardo Jedliczka wrote:

> Greetings,
>
> I have a little experience with 8051 family, so Im really new user of
> ARM
> microcontrollers.
>
> I see a lot of debugger or developper boards to ARM7 mc in Net, but
> some is
> not disponible in Brazil, or very expensive (between USD 450 and USD
> 1700).
>
> Maybe, anyone have a diagram to assemble a board with this function
> (using
> PHILIPS LPC2000 software).
>
> Thanks,
>
> Eduardo Jedliczka
> Brazil.
>
>
----- Original Message -----
From: "Marcelo Mallmann Dias"
To:
Sent: Wednesday, July 05, 2006 12:59 AM
Subject: Re: [lpc2000] How to make a writter board to LPC2000 or AT91SAM7 ?
> Opa
>
> Both Embedded Artists (http://www.embeddedartists.com) and Olimex
> (www.olimex.com) make their schematics available on their websites.

I have a very simple design here:

http://webspace.webring.com/people/jl/leon_heller//lpc2104.html

Gerber and drill files are provided so that you can get your own boards
made.

Leon

Thanks for all...

=====================Eduardo Jedliczka
Apucarana - PR
Brazil
=====================
----- Original Message -----
From: "Leon Heller"
To:
Sent: Wednesday, July 05, 2006 4:11 AM
Subject: Re: [lpc2000] How to make a writter board to LPC2000 or AT91SAM7 ?
> ----- Original Message -----
> From: "Marcelo Mallmann Dias"
> To:
> Sent: Wednesday, July 05, 2006 12:59 AM
> Subject: Re: [lpc2000] How to make a writter board to LPC2000 or AT91SAM7
> ?
>> Opa
>>
>> Both Embedded Artists (http://www.embeddedartists.com) and Olimex
>> (www.olimex.com) make their schematics available on their websites.
>
> I have a very simple design here:
>
> http://webspace.webring.com/people/jl/leon_heller//lpc2104.html
>
> Gerber and drill files are provided so that you can get your own boards
> made.
>
> Leon