EFSL with crossworks

Started by drproton2003 September 8, 2006
Hey all,

Has anyone used EFSL with crossworks? I would like to know how to
build the librarys and example applications using crossworks. I'm not
too familiar with this sort of thing so any help would be greatly
appreciated.

An Engineer's Guide to the LPC2100 Series

----- Original Message -----
From: "drproton2003"
To:
Sent: Saturday, September 09, 2006 12:36 AM
Subject: [lpc2000] EFSL with crossworks
>Hey all,

>Has anyone used EFSL with crossworks? I would like to know how to
>build the librarys and example applications using crossworks. I'm not
>too familiar with this sort of thing so any help would be greatly
>appreciated.

I have a FreeRTOS.org demo from a third party that uses GCC and EFSL to
read/write html to an SD card on a SAM7X. It should prove a good reference.
If this is of interest send me an email using the email address on the
contacts page of the FreeRTOS.org site and I will forward it on to you.

Regards,
Richard.

+ http://www.FreeRTOS.org
+ http://www.SafeRTOS.com
for Cortex-M3, ARM7, ARM9, HCS12, H8S, MSP430
Microblaze, Coldfire, AVR, x86, 8051 & PIC18 * * * *