OLIMEX LPC L2294 (GNUARM, ECOS, RTOS) ??

Started by santosfilipe February 8, 2007
Hello,

I'm working on OLIMEX LPC-L2294, and have a few questions, and i ask
for help!
First question is, what do you think about of RTOS vs ECOS? (I have
instaled the pre-builted RedBOOT and it work, it reset's after some time)

2 There is somebody that have used the file olpcl2294-1.0.epk on
ecos? (because I try to add att ecos and it remove on the end)
tclsh $ECOS_REPOSITORY/ecosadmin.tcl --accept_license add
olpcl2294-1.0.epk

adding package CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294
adding package CYGPKG_DEVS_FLASH_ARM_OLPCL2294
adding package CYGPKG_DEVS_ETH_ARM_OLPCL2294
adding target olpcl2294
removing target olpcl2294 (why it do this?)

3 I have compiled the gcc 4.1 for arm, but I can't put work the led
blink! there some example that works fine with this board?
4 Here i can find the tree with lpc2294.h and the startup.s for this
board?

Many thanks
Filipe Santos

An Engineer's Guide to the LPC2100 Series