Re: EFSL with crossworks

Started by mgia...@yahoo.gr February 28, 2007
----- Original Message -----
>From: "drproton2003"
>To:
>Sent: Saturday, September 09, 2006 12:36 AM
>Subject: [lpc2000] EFSL with crossworks
>> Hey all,
>
>> Has anyone used EFSL with crossworks? I would like to know how to
>> build the librarys and example applications using crossworks. I'm not
>> too familiar with this sort of thing so any help would be greatly
>> appreciated.
>
>I have a FreeRTOS.org demo from a third party that uses GCC and EFSL to
>read/write html to an SD card on a SAM7X. It should prove a good reference.
>If this is of interest send me an email using the email address on the
>contacts page of the FreeRTOS.org site and I will forward it on to you.
>
>Regards,
>Richard.
>
>+ http://www.FreeRTOS.org
>+ http://www.SafeRTOS.com
>for Cortex-M3, ARM7, ARM9, HCS12, H8S, MSP430
>Microblaze, Coldfire, AVR, x86, 8051 & PIC18 * * * *

Hello... I'm interested to this "FreeRTOS.org demo from a third party that uses GCC and EFSL". Is it possible to forward it to me too?
Thanks in advance

Manos

An Engineer's Guide to the LPC2100 Series