Dear All,
I am thinking of using LPC2138 for a new project and tried to get it
going using GNUARM tool chain with a simple prototype design.
I am facing problems in JTAG debugging using Amontec-tiny.
can you please recommend which tool should i go for. any if any one
has simple application return with schematic for LPC2138 which can be
shared that will be great.
Thanks,
Mihir
Starting with LPC2138
Started by ●August 6, 2007
Reply by ●August 6, 20072007-08-06
> I am thinking of using LPC2138 for a new project and
tried to get it
> going using GNUARM tool chain with a simple prototype design.
>
> I am facing problems in JTAG debugging using Amontec-tiny.
>
> can you please recommend which tool should i go for.
If you want to use GCC then I would recommend CrossWorks with a
CrossConnect. It is fast and has never missed a beat for me. I also have a
demo project for using this setup here
http://www.freertos.org/portlpc2138.html
>with schematic for LPC2138 which can be
> shared that will be great.
You could probably use the CrossFire board as an example for the hardware
too (links available on above link).
Regards,
Richard.
+ http://www.FreeRTOS.org
A free real time kernel for 8, 16 and 32bit systems.
+ http://www.SafeRTOS.com
An IEC 61508 certified real time kernel for safety related systems.
> going using GNUARM tool chain with a simple prototype design.
>
> I am facing problems in JTAG debugging using Amontec-tiny.
>
> can you please recommend which tool should i go for.
If you want to use GCC then I would recommend CrossWorks with a
CrossConnect. It is fast and has never missed a beat for me. I also have a
demo project for using this setup here
http://www.freertos.org/portlpc2138.html
>with schematic for LPC2138 which can be
> shared that will be great.
You could probably use the CrossFire board as an example for the hardware
too (links available on above link).
Regards,
Richard.
+ http://www.FreeRTOS.org
A free real time kernel for 8, 16 and 32bit systems.
+ http://www.SafeRTOS.com
An IEC 61508 certified real time kernel for safety related systems.
Reply by ●August 7, 20072007-08-07
Mihir M Patel wrote:
> Dear All,
>
> I am thinking of using LPC2138 for a new project and tried to get it
> going using GNUARM tool chain with a simple prototype design.
>
>
Windows (cygwin) or Linux?
--
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net http://cyberiansoftware.com http://openzipit.org
"Windows? No thanks, I have work to do..."
----------------
> Dear All,
>
> I am thinking of using LPC2138 for a new project and tried to get it
> going using GNUARM tool chain with a simple prototype design.
>
>
Windows (cygwin) or Linux?
--
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net http://cyberiansoftware.com http://openzipit.org
"Windows? No thanks, I have work to do..."
----------------
Reply by ●August 7, 20072007-08-07
Windows (Cygwin).
Thanks
--- In l..., Tom Walsh wrote:
>
> Mihir M Patel wrote:
> > Dear All,
> >
> > I am thinking of using LPC2138 for a new project and tried to get it
> > going using GNUARM tool chain with a simple prototype design.
> >
> >
> Windows (cygwin) or Linux?
> --
> Tom Walsh - WN3L - Embedded Systems Consultant
> http://openhardware.net http://cyberiansoftware.com http://openzipit.org
> "Windows? No thanks, I have work to do..."
> ----------------
>
Thanks
--- In l..., Tom Walsh wrote:
>
> Mihir M Patel wrote:
> > Dear All,
> >
> > I am thinking of using LPC2138 for a new project and tried to get it
> > going using GNUARM tool chain with a simple prototype design.
> >
> >
> Windows (cygwin) or Linux?
> --
> Tom Walsh - WN3L - Embedded Systems Consultant
> http://openhardware.net http://cyberiansoftware.com http://openzipit.org
> "Windows? No thanks, I have work to do..."
> ----------------
>
