hi, good afternoon, everybody,

I am using LPC2364, SSD1926 and the Touch screen LCD together to show
something on the LCD,

but now the LPC2364 and SSD1926 all do not have short circuit any
more, the 3 power supplier levels 5v , 3.3v , 1.8 v all there stable.

the MCU is connected to PC through UART0, max232 also powered
correctly, this part of circuitry refer to the MCB2300 evaluation
Board,

why I can not get the device signature from FlashMagi? any body can
tell me possible reason? thanks! Start a New Thread

Hi,

Have you connected proper oscillator?
How are you reading the signature from flash magic?
I hope you can refer to flash programming section in the LPC2364 datasheet.

Since you are using Flash magic, I suggest you to use Tools-> Terminal
and try giving some commands and see, whats the response.

regards,
OST
On Nov 21, 2007 2:16 PM, myn0601 wrote:
> hi, good afternoon, everybody,
>
> I am using LPC2364, SSD1926 and the Touch screen LCD together to show
> something on the LCD,
> but now the LPC2364 and SSD1926 all do not have short circuit any
> more, the 3 power supplier levels 5v , 3.3v , 1.8 v all there stable.
>
> the MCU is connected to PC through UART0, max232 also powered
> correctly, this part of circuitry refer to the MCB2300 evaluation
> Board,
>
> why I can not get the device signature from FlashMagi? any body can
> tell me possible reason? thanks!
>
>

--
With Regards,
OST Start a New Thread