Hello!
I'm using a HD44780 based LCD with a LPC2103.
The LCD power supply is 5V and Output I/O values of LPC2103 are 3.3V .
Reading about this LCD, the Input "high" voltage is 2.2v min, so it is
tolerant. But somehow, all of a sudden, the LCD lose its Synchronism and
shows strange characters or just turn off characters.
If I execute the startup routine again, LCD comes back to normal.
The interface with the uC is 4-bit mode.
I allready re-writed the routines and used other people routines to
control the LCD but without success.
Can anyone helpme?
Best Regards
Lucas
--
Att
Lucas Caldoncelli Rodrigues
OHM Technology
Depto. Tnico
(41) 3019-1014
(41) 8848-2255
(41) 9975-7451
www.ohmtech.com.br
Esta mensagem pode conter informao confidencial.
Se vocn for o destinatio ou a pessoa autorizada a receber esta mensagem,
n poderusar, copiar ou divulgar as informaes nela
contidas.
LPC2103 and HD44780 based LCD
Started by ●February 25, 2008
Reply by ●February 25, 20082008-02-25
http://www.inf.furb.br/~maw/arm_tcc/
TCC QUE ORIENTEI!
To: l...From: l...@ohmtech.com.brDate: Mon, 25 Feb 2008 11:18:50 -0300Subject: [lpc2000] LPC2103 and HD44780 based LCD
Hello!I'm using a HD44780 based LCD with a LPC2103.The LCD power supply is 5V and Output I/O values of LPC2103 are 3.3V .Reading about this LCD, the Input "high" voltage is 2.2v min, so it is tolerant. But somehow, all of a sudden, the LCD lose its Synchronism and shows strange characters or just turn off characters.If I execute the startup routine again, LCD comes back to normal.The interface with the uC is 4-bit mode.I allready re-writed the routines and used other people routines to control the LCD but without success.Can anyone helpme?Best RegardsLucas-- AttLucas Caldoncelli RodriguesOHM TechnologyDepto. Tnico(41) 3019-1014(41) 8848-2255(41) 9975-7451www.ohmtech.com.brEsta mensagem pode conter informao confidencial.Se vocn for o destinatio ou a pessoa autorizada a receber esta mensagem, n poderusar, copiar ou divulgar as informaes nelacontidas.
_________________________________________________________________
Cansado de espa para s50 fotos? Conhe o Spaces, o site de relacionamentos com at6,000 fotos!
http://www.amigosdomessenger.com.br
TCC QUE ORIENTEI!
To: l...From: l...@ohmtech.com.brDate: Mon, 25 Feb 2008 11:18:50 -0300Subject: [lpc2000] LPC2103 and HD44780 based LCD
Hello!I'm using a HD44780 based LCD with a LPC2103.The LCD power supply is 5V and Output I/O values of LPC2103 are 3.3V .Reading about this LCD, the Input "high" voltage is 2.2v min, so it is tolerant. But somehow, all of a sudden, the LCD lose its Synchronism and shows strange characters or just turn off characters.If I execute the startup routine again, LCD comes back to normal.The interface with the uC is 4-bit mode.I allready re-writed the routines and used other people routines to control the LCD but without success.Can anyone helpme?Best RegardsLucas-- AttLucas Caldoncelli RodriguesOHM TechnologyDepto. Tnico(41) 3019-1014(41) 8848-2255(41) 9975-7451www.ohmtech.com.brEsta mensagem pode conter informao confidencial.Se vocn for o destinatio ou a pessoa autorizada a receber esta mensagem, n poderusar, copiar ou divulgar as informaes nelacontidas.
_________________________________________________________________
Cansado de espa para s50 fotos? Conhe o Spaces, o site de relacionamentos com at6,000 fotos!
http://www.amigosdomessenger.com.br
Reply by ●February 26, 20082008-02-26
Works like charm on my LPC2136, please ensure that on display,
1. WRT line is grounded.
2. There is a small delay in ENABLE strobe.
3. RS line is DATA mode.
Warm Regards,
Mukund Deshmukh,
Beta Computronics Pvt Ltd.
10/1 IT Park, Parsodi,
Nagpur -440022 India.
Web site - http://betacomp.com
MEET US AT,
Chinaplas 2008, Shanghai, China.
Hall E3, Booth P49
Hello!I'm using a HD44780 based LCD with a LPC2103.The LCD power supply is
5V and Output I/O values of LPC2103 are 3.3V .Reading about this LCD, the
Input "high" voltage is 2.2v min, so it is tolerant. But somehow, all of a
sudden, the LCD lose its Synchronism and shows strange characters or just
turn off characters.If I execute the startup routine again, LCD comes back
to normal.The interface with the uC is 4-bit mode.I allready re-writed the
routines and used other people routines to control the LCD but without
success.Can anyone helpme?Best RegardsLucas-- AttLucas Caldoncelli
RodriguesOHM TechnologyDepto. Tnico(41) 3019-1014(41) 8848-2255(41)
9975-7451www.ohmtech.com.brEsta mensagem pode conter informao
confidencial.Se vocn for o destinatio ou a pessoa autorizada a receber
esta mensagem, n poderusar, copiar ou divulgar as informaes
nelacontidas.
_________________________________________________________________
Cansado de espa para s50 fotos? Conhe o Spaces, o site de
relacionamentos com at6,000 fotos!
http://www.amigosdomessenger.com.br
1. WRT line is grounded.
2. There is a small delay in ENABLE strobe.
3. RS line is DATA mode.
Warm Regards,
Mukund Deshmukh,
Beta Computronics Pvt Ltd.
10/1 IT Park, Parsodi,
Nagpur -440022 India.
Web site - http://betacomp.com
MEET US AT,
Chinaplas 2008, Shanghai, China.
Hall E3, Booth P49
Hello!I'm using a HD44780 based LCD with a LPC2103.The LCD power supply is
5V and Output I/O values of LPC2103 are 3.3V .Reading about this LCD, the
Input "high" voltage is 2.2v min, so it is tolerant. But somehow, all of a
sudden, the LCD lose its Synchronism and shows strange characters or just
turn off characters.If I execute the startup routine again, LCD comes back
to normal.The interface with the uC is 4-bit mode.I allready re-writed the
routines and used other people routines to control the LCD but without
success.Can anyone helpme?Best RegardsLucas-- AttLucas Caldoncelli
RodriguesOHM TechnologyDepto. Tnico(41) 3019-1014(41) 8848-2255(41)
9975-7451www.ohmtech.com.brEsta mensagem pode conter informao
confidencial.Se vocn for o destinatio ou a pessoa autorizada a receber
esta mensagem, n poderusar, copiar ou divulgar as informaes
nelacontidas.
_________________________________________________________________
Cansado de espa para s50 fotos? Conhe o Spaces, o site de
relacionamentos com at6,000 fotos!
http://www.amigosdomessenger.com.br
Reply by ●February 26, 20082008-02-26
LUCAS,
FUNCIONOU 100% O LCD CONOSCO.
DA UMA OLHADA NO TCC DE MEU ALUNO
http://www.inf.furb.br/~maw/arm_tcc/
TCPIPCHIP
Aproveitando, visite minha pagina www.basic4ever.com
To: l...From: l...@ohmtech.com.brDate: Mon, 25 Feb 2008 11:18:50 -0300Subject: [lpc2000] LPC2103 and HD44780 based LCD
Hello!I'm using a HD44780 based LCD with a LPC2103.The LCD power supply is 5V and Output I/O values of LPC2103 are 3.3V .Reading about this LCD, the Input "high" voltage is 2.2v min, so it is tolerant. But somehow, all of a sudden, the LCD lose its Synchronism and shows strange characters or just turn off characters.If I execute the startup routine again, LCD comes back to normal.The interface with the uC is 4-bit mode.I allready re-writed the routines and used other people routines to control the LCD but without success.Can anyone helpme?Best RegardsLucas-- AttLucas Caldoncelli RodriguesOHM TechnologyDepto. Tnico(41) 3019-1014(41) 8848-2255(41) 9975-7451www.ohmtech.com.brEsta mensagem pode conter informao confidencial.Se vocn for o destinatio ou a pessoa autorizada a receber esta mensagem, n poderusar, copiar ou divulgar as informaes nelacontidas.
_________________________________________________________________
Confira veos com notias do NY Times, gols direto do Lance, videocassetadas e muito mais no MSN Video!
http://video.msn.com/?mkt=pt-br
FUNCIONOU 100% O LCD CONOSCO.
DA UMA OLHADA NO TCC DE MEU ALUNO
http://www.inf.furb.br/~maw/arm_tcc/
TCPIPCHIP
Aproveitando, visite minha pagina www.basic4ever.com
To: l...From: l...@ohmtech.com.brDate: Mon, 25 Feb 2008 11:18:50 -0300Subject: [lpc2000] LPC2103 and HD44780 based LCD
Hello!I'm using a HD44780 based LCD with a LPC2103.The LCD power supply is 5V and Output I/O values of LPC2103 are 3.3V .Reading about this LCD, the Input "high" voltage is 2.2v min, so it is tolerant. But somehow, all of a sudden, the LCD lose its Synchronism and shows strange characters or just turn off characters.If I execute the startup routine again, LCD comes back to normal.The interface with the uC is 4-bit mode.I allready re-writed the routines and used other people routines to control the LCD but without success.Can anyone helpme?Best RegardsLucas-- AttLucas Caldoncelli RodriguesOHM TechnologyDepto. Tnico(41) 3019-1014(41) 8848-2255(41) 9975-7451www.ohmtech.com.brEsta mensagem pode conter informao confidencial.Se vocn for o destinatio ou a pessoa autorizada a receber esta mensagem, n poderusar, copiar ou divulgar as informaes nelacontidas.
_________________________________________________________________
Confira veos com notias do NY Times, gols direto do Lance, videocassetadas e muito mais no MSN Video!
http://video.msn.com/?mkt=pt-br
