Forums

diference btw GNU tool chain and ARM tool chain

Started by urjust2oocool March 28, 2008
hi guys,
I was using Kiel ARM tool chain all these days. Now i move on to using
GNU tool chain which comes along with Keil. Could u please wat are the
settings that i've to look intO BEFOR I'VE TO COMPILE.

Eg.
1)Which liknker descriptive file.
2)Do i 've to specify any address location.etc

Rajeev

An Engineer's Guide to the LPC2100 Series

sorry 42Bastian ,
I was in a bit off hurry at that time.

I need some info regarding the GNU tool chain used in Keil.

Can u give me a proper link to another GCC compiler setup which you would suggest me to use.

Rajeev

42Bastian wrote:
urjust2oocool schrieb:

>>> Do need ur help ASAP....urgent.
>> SEND STRAWBERRIES AND CHAMPAGNE. URGENT.
>>
>> --
>> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
>> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>>
> will do that immediately i get my started...........so need ur
> help.....i info on GNU ARM Keil IDE

I am not a native English speaker/writer, so I certainly make errors,
but please take your time to write proper words, this is no RAP-mailing
list.

--
42Bastian

Note: SPAM-only account, direct mail to bs42@...

--- In l..., "Paul Curtis" wrote:
>
> Hi,
>
> > hi guys,
> > Need ur help in my new project.
> > All these days i've been using the evaluation version of Keil
ARM tool
> > chain. Since it is an evaluation version,I'll 've to shift from
this
> > tool chain to using GNU ARM tool chain.
> > I've understood that we've to specify some more of the seetings
in the
> > Keil IDE, such as,
> > 1)linker descriptive file
> > **Which *.ld should i specify or what basis should i
configure
> > that file.
> >
> > 2).Do i 've specify any memory.,
> > 3),etc.
> >
> > Do need ur help ASAP....urgent.
>
> SEND STRAWBERRIES AND CHAMPAGNE. URGENT.
>
> --
> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>
will do that immediately i get my started...........so need ur
help.....i info on GNU ARM Keil IDE