Forums

Start application from a board without reset

Started by hamdibouafsoun May 23, 2008
Hi to all

I'm using Olimex lpc2294 with rowley Crossworks , i've programmed my
application correctly using my JTAG interface ,

now i want that my application turned in power up without using reset
every time

Someone Knows how ?

Thanks in Advance and Sincerly Yours

An Engineer's Guide to the LPC2100 Series

> I'm using Olimex lpc2294 with rowley Crossworks , i've programmed my
> application correctly using my JTAG interface ,
>
> now i want that my application turned in power up without using reset
> every time
>
> Someone Knows how ?

Hey, you've been evaluating since 10/2007, if you plonk down your cash I'm
sure I'd be much more receptive!

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors

--- In l..., "Paul Curtis" wrote:
>
> > I'm using Olimex lpc2294 with rowley Crossworks , i've programmed my
> > application correctly using my JTAG interface ,
> >
> > now i want that my application turned in power up without using reset
> > every time
> >
> > Someone Knows how ?
>
> Hey, you've been evaluating since 10/2007, if you plonk down your
cash I'm
> sure I'd be much more receptive!
>
> --
> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>
the licence that i'm using now is installed on the pc of my university!!

regards
So, in cases where you're being robbed, you're only marginally responsive?

;-)

~ Paul Claessen

From: l... [mailto:l...] On Behalf Of
Paul Curtis
Sent: Friday, May 23, 2008 8:49 AM
To: l...
Subject: RE: [lpc2000] Start application from a board without reset

> I'm using Olimex lpc2294 with rowley Crossworks , i've programmed my
> application correctly using my JTAG interface ,
>
> now i want that my application turned in power up without using reset
> every time
>
> Someone Knows how ?

Hey, you've been evaluating since 10/2007, if you plonk down your cash I'm
sure I'd be much more receptive!

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors


>> I'm using Olimex lpc2294 with rowley Crossworks , i've programmed my
>> application correctly using my JTAG interface ,
>>
>> now i want that my application turned in power up without using reset
>> every time
>>
>> Someone Knows how ?
>
> Hey, you've been evaluating since 10/2007, if you plonk down your cash I'm
> sure I'd be much more receptive!
>

Dear Paul,
Why don't you have a secured licensing system for your software, instead of
fishing on the list for expired license user?
Warm Regards,

Mukund Deshmukh,
Beta Computronics Pvt Ltd.
10/1 IT Park, Parsodi,
Nagpur -440022 India.
Web site - http://betacomp.com

Hi,

> > Hey, you've been evaluating since 10/2007, if you plonk down your
> cash I'm
> > sure I'd be much more receptive!
>
> Dear Paul,
> Why don't you have a secured licensing system for your software,
> instead of fishing on the list for expired license user?

I didn't say this guy is using cracked software--in fact, we have extended
eight evaluation keys to him. All I said was that I would be much happier
if he plonked some cash down because he's been evaluating for a long time.
Clearly, "evaluation" is not the issue here.

Everything get cracked. You know it does. We've been round that question
before on this list. Simply put: my effort is better spent developing
software for paying customers than fighting a losing battle against those
that won't.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors

Mr Paul

Thanks for giving me licences it is true but it's not a duty that i
have a "personal" licence to participate to this forum ,
and thanks for your support in many times i need it,

i'm using a legal permanent licence but not personal like many
others,and i posted my question to this forum because the
documentation support of Crossworks is incompletein many aspect.

if you want to answer my question thanks a lot, me also despite i'm
beginner i had answered many people ,

if you not want to do this let others help me.

Sincerly Yours.

--- In l..., "Paul Curtis" wrote:
>
> Hi,
>
> > > Hey, you've been evaluating since 10/2007, if you plonk down your
> > cash I'm
> > > sure I'd be much more receptive!
> >
> > Dear Paul,
> > Why don't you have a secured licensing system for your software,
> > instead of fishing on the list for expired license user?
>
> I didn't say this guy is using cracked software--in fact, we have
extended
> eight evaluation keys to him. All I said was that I would be much
happier
> if he plonked some cash down because he's been evaluating for a long
time.
> Clearly, "evaluation" is not the issue here.
>
> Everything get cracked. You know it does. We've been round that
question
> before on this list. Simply put: my effort is better spent developing
> software for paying customers than fighting a losing battle against
those
> that won't.
>
> --
> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>

Now that is a realistic approach. I have absolutely no problem with Paul's
fishing. Own a business with IP and you will understand the position.

Michael Scott, SELDS, Inc. http://www.selds.com

Transforming customers concepts into real world products.

_____

From: Paul Curtis [mailto:p...@rowley.co.uk]
Sent: Friday, May 23, 2008 9:49 AM
To: l...
Subject: RE: [lpc2000] Start application from a board without reset

Hi,

> > Hey, you've been evaluating since 10/2007, if you plonk down your
> cash I'm
> > sure I'd be much more receptive!
>
> Dear Paul,
> Why don't you have a secured licensing system for your software,
> instead of fishing on the list for expired license user?

I didn't say this guy is using cracked software--in fact, we have extended
eight evaluation keys to him. All I said was that I would be much happier
if he plonked some cash down because he's been evaluating for a long time.
Clearly, "evaluation" is not the issue here.

Everything get cracked. You know it does. We've been round that question
before on this list. Simply put: my effort is better spent developing
software for paying customers than fighting a losing battle against those
that won't.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.
co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors


Hi,

> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> >
> the licence that i'm using now is installed on the pc of my
> university!!

...in which case you should be asking your tutor these question! That's the
whole point of Educational Licenses. We cut the university a huge discount
but the basis is that the tutors shoulder the responsibility of support.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors

Hi,

> Thanks for giving me licences it is true but it's not a duty that i
> have a "personal" licence to participate to this forum ,
> and thanks for your support in many times i need it,
>
> i'm using a legal permanent licence but not personal like many
> others,and i posted my question to this forum because the
> documentation support of Crossworks is incompletein many aspect.
>
> if you want to answer my question thanks a lot, me also despite i'm
> beginner i had answered many people ,
>
> if you not want to do this let others help me.

The point is that (a) you haven't registered a permanent license under your
e-mail address (a university educational license will be registered to
either a single student *or* a single machine, not more). And if you're
using an educational license, the proviso is that support should come from
tutors not our helpdesk or me personally--that's why we cut universities a
huge discount on our software. You'll find that *many* companies will not
extend a university an 80% discount on their software and then let a class
of students use that single purchase.

In short, don't be upset we don't answer your questions. Ask your tutor, or
purchase your own license if you need help from us. It's really very
simple.

Have you bothered to read the documentation that comes with the LPC2000
package regarding reset?

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors