Crossworks, stack and dissassembly

Started by rich...@gmail.com October 24, 2008
Hi, I recently purchased Crossworks for ARM. In the past, I've used IAR EW for the MSP430. With IAR, I can view how much of the stack is being used. Is there a similar feature in Crossworks?

Also, how do I look at the dissassembly with Crossworks?

Thanks in advance.

Rich

An Engineer's Guide to the LPC2100 Series

----- Original Message -----
From:
To:
Sent: Friday, October 24, 2008 7:55 PM
Subject: [lpc2000] Crossworks, stack and dissassembly
> Hi, I recently purchased Crossworks for ARM. In the past, I've used IAR EW
> for the MSP430. With IAR, I can view how much of the stack is being used.
> Is there a similar feature in Crossworks?

You can display the registers including the SP.

>
> Also, how do I look at the dissassembly with Crossworks?

Tools > Disassemble.

Leon

Hi,

> Hi, I recently purchased Crossworks for ARM. In the past, I've used IAR EW
for
> the MSP430. With IAR, I can view how much of the stack is being used. Is
there
> a similar feature in Crossworks?

Depends. You can calculate it from the current SP and the SP on entry to
main().

> Also, how do I look at the dissassembly with Crossworks?

As Leon says, Tools > Disassemble to show a disassembly of the whole file.
During debugging, set the Debug mode to Intermixed or Assembly view.

-- Paul.

Thank you both for the info.

--- In l..., "Paul Curtis" wrote:
>
> Hi,
>
> > Hi, I recently purchased Crossworks for ARM. In the past, I've
used IAR EW
> for
> > the MSP430. With IAR, I can view how much of the stack is being
used. Is
> there
> > a similar feature in Crossworks?
>
> Depends. You can calculate it from the current SP and the SP on
entry to
> main().
>
> > Also, how do I look at the dissassembly with Crossworks?
>
> As Leon says, Tools > Disassemble to show a disassembly of the whole
file.
> During debugging, set the Debug mode to Intermixed or Assembly view.
>
> -- Paul.
>