Hi,
can anybody help me with LCD controller in LPC2478? I've my own board very
simmilar to Embedded Artists LPC2478 demo board. I'd like to display image
stored at SDRAM on QVGA TFT panel, but It's only showing some vertical
color lines which are not displayed from SDRAM memory space. Could anybody
provide me some sample code with LCD controller setup, which will display image
stored in SDRAM?
Regards,
Michal Krestan
LPC2478 LCD controller
Started by ●December 13, 2008
Reply by ●December 13, 20082008-12-13
At 15:33 13.12.2008 +0100, you wrote:
>Hi,
>
>can anybody help me with LCD controller in LPC2478? I've my own
>board very simmilar to Embedded Artists LPC2478 demo board. I'd like
>to display image stored at SDRAM on QVGA TFT panel, but It's only
>showing some vertical color lines which are not displayed from SDRAM
>memory space. Could anybody provide me some sample code with LCD
>controller setup, which will display image stored in SDRAM?
http://www.standardics.nxp.com/support/design/microcontrollers/lcd.controller/
Herbert
>Hi,
>
>can anybody help me with LCD controller in LPC2478? I've my own
>board very simmilar to Embedded Artists LPC2478 demo board. I'd like
>to display image stored at SDRAM on QVGA TFT panel, but It's only
>showing some vertical color lines which are not displayed from SDRAM
>memory space. Could anybody provide me some sample code with LCD
>controller setup, which will display image stored in SDRAM?
http://www.standardics.nxp.com/support/design/microcontrollers/lcd.controller/
Herbert
Reply by ●December 15, 20082008-12-15
hi, Michal
Please check that if Register "LCD_UPBASE" point to SDRAM address
where you store bitmap code .
Regards
Vincent
--- In l..., Herbert Demmel wrote:
>
> At 15:33 13.12.2008 +0100, you wrote:
> >Hi,
> >
> >can anybody help me with LCD controller in LPC2478? I've my own
> >board very simmilar to Embedded Artists LPC2478 demo board. I'd
like
> >to display image stored at SDRAM on QVGA TFT panel, but It's only
> >showing some vertical color lines which are not displayed from
SDRAM
> >memory space. Could anybody provide me some sample code with LCD
> >controller setup, which will display image stored in SDRAM?
http://www.standardics.nxp.com/support/design/microcontrollers/lcd.con
troller/
>
> Herbert
>
Please check that if Register "LCD_UPBASE" point to SDRAM address
where you store bitmap code .
Regards
Vincent
--- In l..., Herbert Demmel wrote:
>
> At 15:33 13.12.2008 +0100, you wrote:
> >Hi,
> >
> >can anybody help me with LCD controller in LPC2478? I've my own
> >board very simmilar to Embedded Artists LPC2478 demo board. I'd
like
> >to display image stored at SDRAM on QVGA TFT panel, but It's only
> >showing some vertical color lines which are not displayed from
SDRAM
> >memory space. Could anybody provide me some sample code with LCD
> >controller setup, which will display image stored in SDRAM?
http://www.standardics.nxp.com/support/design/microcontrollers/lcd.con
troller/
>
> Herbert
>