Forums

CMX and IAR

Started by jamesradix1969 October 23, 2004

Has anyone ported CMX RTOS to the LPC family? And by any chance
using the IAR compiler? It seems there is a fair amount of low
level porting that must be done and I was curious if anyone has
already done it.
James



An Engineer's Guide to the LPC2100 Series


Hi James,

I heard that CMX ports for the LPC are available for the ARM tools
(ADS) and the Keil tools. afaik, IAR has not been ported yet.

Cheers, Bob

--- In , "jamesradix1969" <jamesradix1969@y...>
wrote:
>
> Has anyone ported CMX RTOS to the LPC family? And by any chance
> using the IAR compiler? It seems there is a fair amount of low
> level porting that must be done and I was curious if anyone has
> already done it.
> James





> --- In , "jamesradix1969"
<jamesradix1969@y...>
> wrote:
> >
> > Has anyone ported CMX RTOS to the LPC family? And by any chance
> > using the IAR compiler? It seems there is a fair amount of low
> > level porting that must be done and I was curious if anyone has
> > already done it.
> > James

Hi James,

This is JR Rodrigues from CMX. The CMX-RTX RTOS and the CMX-Tiny+
RTOS have been fully ported to the IAR C tools and the ARM series of
processors. There is also a kernel awareness module in the IAR C
tools for the RTOSes. Our url is http://www.cmx.com

Best Regards,

JR





--- In , "jrcmx1234" <jr@c...> wrote:
>
> > --- In , "jamesradix1969"
> <jamesradix1969@y...>
> > wrote:
> > >
> > > Has anyone ported CMX RTOS to the LPC family? And by any chance
> > > using the IAR compiler? It seems there is a fair amount of low
> > > level porting that must be done and I was curious if anyone has
> > > already done it.
> > > James
>
> Hi James,
>
> This is JR Rodrigues from CMX. The CMX-RTX RTOS and the CMX-Tiny+
> RTOS have been fully ported to the IAR C tools and the ARM series of
> processors. There is also a kernel awareness module in the IAR C
> tools for the RTOSes. Our url is http://www.cmx.com
>
> Best Regards,
>
> JR

JR,

What about Micronet and the Keil tools? I was having some difficultly
getting it to work and asked if there was an updated port. The
support person told me to do it myself.

--Peter