Forums

NATIONAL_PHY or MICREL_PHY

Started by jdauchot July 15, 2009
Hi

I am porting a MAC driver for LPC2378 from examples from NXP web site.
I am doing it for an Olimex LPC-2378-STK.
The example says to use MICREL_PHY for EA and IAR boards and use NATIONAL_PHY on ENG and KEIL boards.

What are the differences and which one do I use on the Olimex boards

Regards

Jean-Jacques

An Engineer's Guide to the LPC2100 Series

Hi

I found out from the circuit diagram that it uses MICREL chip

Thanks

Jean-Jacques

_____

From: l... [mailto:l...] On Behalf Of
jdauchot
Sent: 15 July 2009 16:17
To: l...
Subject: [lpc2000] NATIONAL_PHY or MICREL_PHY

Hi

I am porting a MAC driver for LPC2378 from examples from NXP web site.
I am doing it for an Olimex LPC-2378-STK.
The example says to use MICREL_PHY for EA and IAR boards and use
NATIONAL_PHY on ENG and KEIL boards.

What are the differences and which one do I use on the Olimex boards

Regards

Jean-Jacques



> I am porting a MAC driver for LPC2378 from examples from NXP web site.
> I am doing it for an Olimex LPC-2378-STK.
> The example says to use MICREL_PHY for EA and IAR boards and use
> NATIONAL_PHY on ENG and KEIL boards.
>
> What are the differences and which one do I use on the Olimex boards

You have a pair of eyes, an Internet connection, Google, a PDF reader, and
must know www.olimex.com. You are able, therefore, to DO THIS YOURSELF.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks V2 is out for LPC1700, LPC3100, LPC3200, SAM9, and more!

I did just that sorry do not need to shout

_____

From: l... [mailto:l...] On Behalf Of
Paul Curtis
Sent: 15 July 2009 16:46
To: l...
Subject: RE: [lpc2000] NATIONAL_PHY or MICREL_PHY

> I am porting a MAC driver for LPC2378 from examples from NXP web site.
> I am doing it for an Olimex LPC-2378-STK.
> The example says to use MICREL_PHY for EA and IAR boards and use
> NATIONAL_PHY on ENG and KEIL boards.
>
> What are the differences and which one do I use on the Olimex boards

You have a pair of eyes, an Internet connection, Google, a PDF reader, and
must know www.olimex.com. You are able, therefore, to DO THIS YOURSELF.

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.
co.uk
CrossWorks V2 is out for LPC1700, LPC3100, LPC3200, SAM9, and more!