Forums

LPC2148 Start

Started by atomsoftlive August 27, 2009
Hey guys i use crossworks for arm but want to try this other dev platform.

Can someone explain to me or link me to a good (up to date) tutorial on how to setup eclipse and other tools needed for developing on the LPC2000 family.

An Engineer's Guide to the LPC2100 Series

On Thu, Aug 27, 2009 at 8:12 PM, atomsoftlive wrote:

> Hey guys i use crossworks for arm but want to try this other dev platform.
>
> Can someone explain to me or link me to a good (up to date) tutorial on how
> to setup eclipse and other tools needed for developing on the LPC2000
> family.
>
>
>

Have you tried http://www.makingthings.com/wiki/eclipse-openocd-gnu-arm-toolchain
&
http://www.makingthings.com/wiki/creating-an-eclipse-project...??

--
Warm regards
Ashwin
NGX Technologies Pvt. Ltd.
http://code.google.com/p/blueboard-lpc214x/


--- In l..., "atomsoftlive" wrote:
>
> Hey guys i use crossworks for arm but want to try this other dev platform.
>
> Can someone explain to me or link me to a good (up to date) tutorial on how to setup eclipse and other tools needed for developing on the LPC2000 family.
>

It kind of depends on what platform you are using. For Windows, just install YAGARTO and the associated tools. You'll be all set.

For Linux, you should probably build GNUARM from source See http://gnuarm.org/support.html Download the latest version (4 files under GCC-4.3 toolchain) and follow the yellow brick road (Build process). You can get Eclipse for Linux in a number of ways. It may even be a package for your distro. You should probably build OpenOCD from source.

Richard