Regarding I2C Interrupts back in track.

Started by samjith_wasim September 9, 2009
Hello Guys,

I was able to accomplish the I2C Interrupts ; When I created a separate project for I2C Interrupts I was able to read all the data on req addresses but later when I integrated the I2C Interrupt Routine with my current development application , I was able to read only the first ten address locations , the code remains the same. Where should be the problem ???

Thanks for all your Support .

Looking forward,
Samjith

An Engineer's Guide to the LPC2100 Series

i2c_irq.c line 64

Am 9/9/2009 6:48 AM, also sprach samjith_wasim:
> Hello Guys,
>
> I was able to accomplish the I2C Interrupts ; When I created a separate project for I2C Interrupts I was able to read all the data on req addresses but later when I integrated the I2C Interrupt Routine with my current development application , I was able to read only the first ten address locations , the code remains the same. Where should be the problem ???
>
> Thanks for all your Support .
>
> Looking forward,
> Samjith
>

@dickbalaska

What do you mean by i2c_irq.c line 64 ?????