Hi everybody,
I would like to use this module : MBED Module based on ARM7 NXP from hitex :
http://www.hitex.com/index.php?id90&L=1
does someone use this module?
any advice is welcome
Thank you very much
MBED Module based on ARM7 NXP evaluation
Started by ●September 26, 2009
Reply by ●September 26, 20092009-09-26
--- In l..., "darga" wrote:
>
> Hi everybody,
>
> I would like to use this module : MBED Module based on ARM7 NXP from hitex : http://www.hitex.com/index.php?id90&L=1
> does someone use this module?
> any advice is welcome
>
> Thank you very much
>
MBED is new (announced this week) so you aren't going to find lots of people that have used it. HOWEVER... if you are new to the embedded world, or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply THE best option for getting started.
I've seen live demos and attended presentations on MBED and I'm really impressed with it. I seriously don't think you will find a simpler approach for embedded development for newbies.
TC
>
> Hi everybody,
>
> I would like to use this module : MBED Module based on ARM7 NXP from hitex : http://www.hitex.com/index.php?id90&L=1
> does someone use this module?
> any advice is welcome
>
> Thank you very much
>
MBED is new (announced this week) so you aren't going to find lots of people that have used it. HOWEVER... if you are new to the embedded world, or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply THE best option for getting started.
I've seen live demos and attended presentations on MBED and I'm really impressed with it. I seriously don't think you will find a simpler approach for embedded development for newbies.
TC
Reply by ●September 26, 20092009-09-26
--- In l..., "tcirobot" wrote:
>
> --- In l..., "darga" wrote:
> >
> > Hi everybody,
> >
> > I would like to use this module : MBED Module based on ARM7 NXP from hitex : http://www.hitex.com/index.php?id90&L=1
> > does someone use this module?
> > any advice is welcome
> >
> > Thank you very much
> > MBED is new (announced this week) so you aren't going to find lots of people that have used it. HOWEVER... if you are new to the embedded world, or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply THE best option for getting started.
>
> I've seen live demos and attended presentations on MBED and I'm really impressed with it. I seriously don't think you will find a simpler approach for embedded development for newbies.
>
> TC
>
I should have added... I think MBED modules are using ARM Cortex-M3 micros (NXP LPC1768 is first?). Use of Cortex-M3 instead of ARM7 provides some key advantages for simplifying embedded development.
And here is a useful link...
http://mbed.org
TC
>
> --- In l..., "darga" wrote:
> >
> > Hi everybody,
> >
> > I would like to use this module : MBED Module based on ARM7 NXP from hitex : http://www.hitex.com/index.php?id90&L=1
> > does someone use this module?
> > any advice is welcome
> >
> > Thank you very much
> > MBED is new (announced this week) so you aren't going to find lots of people that have used it. HOWEVER... if you are new to the embedded world, or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply THE best option for getting started.
>
> I've seen live demos and attended presentations on MBED and I'm really impressed with it. I seriously don't think you will find a simpler approach for embedded development for newbies.
>
> TC
>
I should have added... I think MBED modules are using ARM Cortex-M3 micros (NXP LPC1768 is first?). Use of Cortex-M3 instead of ARM7 provides some key advantages for simplifying embedded development.
And here is a useful link...
http://mbed.org
TC
Reply by ●September 26, 20092009-09-26
Espardino http://www.espardino.com follows the same approach, the
differencecomes
from the SDK.
Espardino offers a GCC based SDK that you can install in your computer and
build your programs offline, while mbed does it online. :-)
Miguel Angel Ajo Pelayo
http://www.nbee.es
+34 91 120 1798
+34 636 52 25 69
skype: ajoajoajo
2009/9/26 tcirobot
> --- In l... , "darga"
> wrote:
> >
> > Hi everybody,
> >
> > I would like to use this module : MBED Module based on ARM7 NXP from
> hitex : http://www.hitex.com/index.php?id90&L=1
> > does someone use this module?
> > any advice is welcome
> >
> > Thank you very much
> > MBED is new (announced this week) so you aren't going to find lots of
> people that have used it. HOWEVER... if you are new to the embedded world,
> or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply
> THE best option for getting started.
>
> I've seen live demos and attended presentations on MBED and I'm really
> impressed with it. I seriously don't think you will find a simpler approach
> for embedded development for newbies.
>
> TC
>
>
>
differencecomes
from the SDK.
Espardino offers a GCC based SDK that you can install in your computer and
build your programs offline, while mbed does it online. :-)
Miguel Angel Ajo Pelayo
http://www.nbee.es
+34 91 120 1798
+34 636 52 25 69
skype: ajoajoajo
2009/9/26 tcirobot
> --- In l... , "darga"
> wrote:
> >
> > Hi everybody,
> >
> > I would like to use this module : MBED Module based on ARM7 NXP from
> hitex : http://www.hitex.com/index.php?id90&L=1
> > does someone use this module?
> > any advice is welcome
> >
> > Thank you very much
> > MBED is new (announced this week) so you aren't going to find lots of
> people that have used it. HOWEVER... if you are new to the embedded world,
> or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply
> THE best option for getting started.
>
> I've seen live demos and attended presentations on MBED and I'm really
> impressed with it. I seriously don't think you will find a simpler approach
> for embedded development for newbies.
>
> TC
>
>
>
Reply by ●September 26, 20092009-09-26
Thanks for your quick responses
I currently work with LPC2378 on the MBC23000 board. but mbed or Espardino are attractive for their seize!!!
Now, the online compilation of mbed don't attract me because I don't have more experience in C!!! however, if this concept work well, it can be very useful for developpement (no soft cost,....)
I will buy these two types of solutions and test them!!
I will keep you inform
thank again
best regards
--- In l..., Miguel Angel wrote:
>
> Espardino http://www.espardino.com follows the same approach, the
> differencecomes
> from the SDK.
>
> Espardino offers a GCC based SDK that you can install in your computer and
> build your programs offline, while mbed does it online. :-)
>
>
> Miguel Angel Ajo Pelayo
> http://www.nbee.es
> +34 91 120 1798
> +34 636 52 25 69
> skype: ajoajoajo
>
>
> 2009/9/26 tcirobot
>
> >
> >
> > --- In l... , "darga"
> > wrote:
> > >
> > > Hi everybody,
> > >
> > > I would like to use this module : MBED Module based on ARM7 NXP from
> > hitex : http://www.hitex.com/index.php?id=1690&L=1
> > > does someone use this module?
> > > any advice is welcome
> > >
> > > Thank you very much
> > >
> >
> > MBED is new (announced this week) so you aren't going to find lots of
> > people that have used it. HOWEVER... if you are new to the embedded world,
> > or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply
> > THE best option for getting started.
> >
> > I've seen live demos and attended presentations on MBED and I'm really
> > impressed with it. I seriously don't think you will find a simpler approach
> > for embedded development for newbies.
> >
> > TC
> >
> >
> >
>
>
>
>
I currently work with LPC2378 on the MBC23000 board. but mbed or Espardino are attractive for their seize!!!
Now, the online compilation of mbed don't attract me because I don't have more experience in C!!! however, if this concept work well, it can be very useful for developpement (no soft cost,....)
I will buy these two types of solutions and test them!!
I will keep you inform
thank again
best regards
--- In l..., Miguel Angel wrote:
>
> Espardino http://www.espardino.com follows the same approach, the
> differencecomes
> from the SDK.
>
> Espardino offers a GCC based SDK that you can install in your computer and
> build your programs offline, while mbed does it online. :-)
>
>
> Miguel Angel Ajo Pelayo
> http://www.nbee.es
> +34 91 120 1798
> +34 636 52 25 69
> skype: ajoajoajo
>
>
> 2009/9/26 tcirobot
>
> >
> >
> > --- In l... , "darga"
> > wrote:
> > >
> > > Hi everybody,
> > >
> > > I would like to use this module : MBED Module based on ARM7 NXP from
> > hitex : http://www.hitex.com/index.php?id=1690&L=1
> > > does someone use this module?
> > > any advice is welcome
> > >
> > > Thank you very much
> > >
> >
> > MBED is new (announced this week) so you aren't going to find lots of
> > people that have used it. HOWEVER... if you are new to the embedded world,
> > or want to "step up" from AVRs, PICs, etc. to 32-bit ARM then MBED is simply
> > THE best option for getting started.
> >
> > I've seen live demos and attended presentations on MBED and I'm really
> > impressed with it. I seriously don't think you will find a simpler approach
> > for embedded development for newbies.
> >
> > TC
> >
> >
> >
>
>
>
>
Reply by ●September 26, 20092009-09-26
--- In l..., "darga" wrote:
>
> Hi everybody,
>
> I would like to use this module : MBED Module based on ARM7 NXP from hitex : http://www.hitex.com/index.php?id90&L=1
> does someone use this module?
> any advice is welcome
>
> Thank you very much
>
Hi,
Hitex is one source, Digikey another or if your connections to NXP are good, may be that is the best source.
The link to Hitex get's me to a getting started Manual that talks about XC167 (after all Hitex is owned by Infineon) and STR9 but nothing about LPC1768!?!? Hey guys at Hitex, update required!!
One question that come to mind, why in the world is there is limit to 60 MHz?? as mentioned here: http://www.hitex.co.uk/shop/index1.html We want to evaluate the performance of the LPC1768, not a device running with brakes on. Just a tipo?
I've seen an article about mbed here:
http://mcu-related.com/
Cheers, Bob
>
> Hi everybody,
>
> I would like to use this module : MBED Module based on ARM7 NXP from hitex : http://www.hitex.com/index.php?id90&L=1
> does someone use this module?
> any advice is welcome
>
> Thank you very much
>
Hi,
Hitex is one source, Digikey another or if your connections to NXP are good, may be that is the best source.
The link to Hitex get's me to a getting started Manual that talks about XC167 (after all Hitex is owned by Infineon) and STR9 but nothing about LPC1768!?!? Hey guys at Hitex, update required!!
One question that come to mind, why in the world is there is limit to 60 MHz?? as mentioned here: http://www.hitex.co.uk/shop/index1.html We want to evaluate the performance of the LPC1768, not a device running with brakes on. Just a tipo?
I've seen an article about mbed here:
http://mcu-related.com/
Cheers, Bob
Reply by ●September 26, 20092009-09-26
--- In l..., "darga" wrote:
>
> Thanks for your quick responses
> I currently work with LPC2378 on the MBC23000 board. but mbed or Espardino are attractive for their seize!!!
Coridium
http://www.coridiumcorp.com
and
Embedded Artists
http://www.embeddedartists.com/products/boards/
both also make a range of good small, LPC2xxx-based boards.
Chris Burrows
CFB Software
Armaide v2.1: LPC2xxx Oberon-07 Development System
http://www.armaide.com
>
> Thanks for your quick responses
> I currently work with LPC2378 on the MBC23000 board. but mbed or Espardino are attractive for their seize!!!
Coridium
http://www.coridiumcorp.com
and
Embedded Artists
http://www.embeddedartists.com/products/boards/
both also make a range of good small, LPC2xxx-based boards.
Chris Burrows
CFB Software
Armaide v2.1: LPC2xxx Oberon-07 Development System
http://www.armaide.com
