Hi,
I am getting difficulty to check the output of each statement excution in my
application with out debugger.any idea which debugger is the best choice to
purchase which works with all the compilers and all LPC ARM7,ARM9 and ARM11
microcontrollers?
GOOD debugger which works with all the compilers and LPC (ARM7 ,ARM9 AND ARM11)
Started by ●March 11, 2010
Reply by ●March 11, 20102010-03-11
What do you need ARM11 support for?? You will not find a debugger that works
with the ARM11 and all compilers. Also any debugger that works with ARM11 is
$$$$$$. We looked into some for the iMX31, most were stand alone units with
no or very little direct compiler support.
Best Regards,
Michael Freeman
Principal Design Engineer
Update Systems, Inc.
-----Original Message-----
From: l... [mailto:l...]On Behalf Of
raju
Sent: Thursday, March 11, 2010 1:48 PM
To: l...
Subject: [lpc2000] GOOD debugger which works with all the compilers and
LPC (ARM7 ,ARM9 AND ARM11)
Hi,
I am getting difficulty to check the output of each statement excution in
my application with out debugger.any idea which debugger is the best choice
to purchase which works with all the compilers and all LPC ARM7,ARM9 and
ARM11 microcontrollers?
with the ARM11 and all compilers. Also any debugger that works with ARM11 is
$$$$$$. We looked into some for the iMX31, most were stand alone units with
no or very little direct compiler support.
Best Regards,
Michael Freeman
Principal Design Engineer
Update Systems, Inc.
-----Original Message-----
From: l... [mailto:l...]On Behalf Of
raju
Sent: Thursday, March 11, 2010 1:48 PM
To: l...
Subject: [lpc2000] GOOD debugger which works with all the compilers and
LPC (ARM7 ,ARM9 AND ARM11)
Hi,
I am getting difficulty to check the output of each statement excution in
my application with out debugger.any idea which debugger is the best choice
to purchase which works with all the compilers and all LPC ARM7,ARM9 and
ARM11 microcontrollers?
Reply by ●March 11, 20102010-03-11
i am mainly looking for ARM7 and ARM9 (ARM 11 if possible) related
debuggers?
On Fri, Mar 12, 2010 at 1:37 AM, Michael Freeman > wrote:
> What do you need ARM11 support for?? You will not find a debugger that
> works with the ARM11 and all compilers. Also any debugger that works with
> ARM11 is $$$$$$. We looked into some for the iMX31, most were stand alone
> units with no or very little direct compiler support.
>
> Best Regards,
> Michael Freeman
> Principal Design Engineer
> Update Systems, Inc.
>
> -----Original Message-----
> *From:* l... [mailto:l...]*On Behalf
> Of *raju
> *Sent:* Thursday, March 11, 2010 1:48 PM
> *To:* l...
> *Subject:* [lpc2000] GOOD debugger which works with all the compilers and
> LPC (ARM7 ,ARM9 AND ARM11)
>
> Hi,
>
> I am getting difficulty to check the output of each statement excution in
> my application with out debugger.any idea which debugger is the best choice
> to purchase which works with all the compilers and all LPC ARM7,ARM9 and
> ARM11 microcontrollers?
>
>
>
--
Raju Nalla
Application Engineer
Unistring Tech solution pvt Ltd
debuggers?
On Fri, Mar 12, 2010 at 1:37 AM, Michael Freeman > wrote:
> What do you need ARM11 support for?? You will not find a debugger that
> works with the ARM11 and all compilers. Also any debugger that works with
> ARM11 is $$$$$$. We looked into some for the iMX31, most were stand alone
> units with no or very little direct compiler support.
>
> Best Regards,
> Michael Freeman
> Principal Design Engineer
> Update Systems, Inc.
>
> -----Original Message-----
> *From:* l... [mailto:l...]*On Behalf
> Of *raju
> *Sent:* Thursday, March 11, 2010 1:48 PM
> *To:* l...
> *Subject:* [lpc2000] GOOD debugger which works with all the compilers and
> LPC (ARM7 ,ARM9 AND ARM11)
>
> Hi,
>
> I am getting difficulty to check the output of each statement excution in
> my application with out debugger.any idea which debugger is the best choice
> to purchase which works with all the compilers and all LPC ARM7,ARM9 and
> ARM11 microcontrollers?
>
>
>
--
Raju Nalla
Application Engineer
Unistring Tech solution pvt Ltd
Reply by ●March 11, 20102010-03-11
GDB
On Thu, Mar 11, 2010 at 11:48 AM, raju wrote:
>
> Hi,
> I am getting difficulty to check the output of each statement excution in my application with out debugger.any idea which debugger is the best choice to purchase which works with all the compilers and all LPC ARM7,ARM9 and ARM11 microcontrollers?
>
>
On Thu, Mar 11, 2010 at 11:48 AM, raju wrote:
>
> Hi,
> I am getting difficulty to check the output of each statement excution in my application with out debugger.any idea which debugger is the best choice to purchase which works with all the compilers and all LPC ARM7,ARM9 and ARM11 microcontrollers?
>
>
Reply by ●March 12, 20102010-03-12
Michael Freeman schrieb:
> What do you need ARM11 support for?? You will not find a debugger that works
> with the ARM11 and all compilers. Also any debugger that works with ARM11 is
> $$$$$$. We looked into some for the iMX31, most were stand alone units with
Nope. J-Link works with ARM11, I myself use IAR with a Phytec i.MX35 and
it just works fine.
And thats not $$$$$$, only $$$ :-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
> What do you need ARM11 support for?? You will not find a debugger that works
> with the ARM11 and all compilers. Also any debugger that works with ARM11 is
> $$$$$$. We looked into some for the iMX31, most were stand alone units with
Nope. J-Link works with ARM11, I myself use IAR with a Phytec i.MX35 and
it just works fine.
And thats not $$$$$$, only $$$ :-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
Reply by ●March 12, 20102010-03-12
Yes, i got information that most of them are using J-link debugger.Will it
support for ARM7 and Cortex,ARM11 WITH ALL compilers?
On Fri, Mar 12, 2010 at 10:48 AM, 42Bastian wrote:
> Michael Freeman schrieb:
>
> > What do you need ARM11 support for?? You will not find a debugger that
> works
> > with the ARM11 and all compilers. Also any debugger that works with ARM11
> is
> > $$$$$$. We looked into some for the iMX31, most were stand alone units
> with
>
> Nope. J-Link works with ARM11, I myself use IAR with a Phytec i.MX35 and
> it just works fine.
>
> And thats not $$$$$$, only $$$ :-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
--
Raju Nalla
Application Engineer
Unistring Tech solution pvt Ltd
support for ARM7 and Cortex,ARM11 WITH ALL compilers?
On Fri, Mar 12, 2010 at 10:48 AM, 42Bastian wrote:
> Michael Freeman schrieb:
>
> > What do you need ARM11 support for?? You will not find a debugger that
> works
> > with the ARM11 and all compilers. Also any debugger that works with ARM11
> is
> > $$$$$$. We looked into some for the iMX31, most were stand alone units
> with
>
> Nope. J-Link works with ARM11, I myself use IAR with a Phytec i.MX35 and
> it just works fine.
>
> And thats not $$$$$$, only $$$ :-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
--
Raju Nalla
Application Engineer
Unistring Tech solution pvt Ltd
Reply by ●March 12, 20102010-03-12
Raju N schrieb:
> Yes, i got information that most of them are using J-link debugger.Will it
> support for ARM7 and Cortex,ARM11 WITH ALL compilers?
Why don't you just ask Segger ?!
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
> Yes, i got information that most of them are using J-link debugger.Will it
> support for ARM7 and Cortex,ARM11 WITH ALL compilers?
Why don't you just ask Segger ?!
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
Reply by ●March 12, 20102010-03-12
> Yes, i got information that most of them are using
J-link debugger.Will it
> support for ARM7 and Cortex,ARM11 WITH ALL compilers?
I'd say if you can afford to buy ALL compilers available for ARM, the price of an extra HW debugger or two should be peanuts when the real (rather than theoretical) need arises. The J-Link probably represents the most well-rounded option in terms of IDE/HW-support ... but if you want to work with every possible ARM platform known to man, it's going to cost a lot more money than a $300 debugger.
> support for ARM7 and Cortex,ARM11 WITH ALL compilers?
I'd say if you can afford to buy ALL compilers available for ARM, the price of an extra HW debugger or two should be peanuts when the real (rather than theoretical) need arises. The J-Link probably represents the most well-rounded option in terms of IDE/HW-support ... but if you want to work with every possible ARM platform known to man, it's going to cost a lot more money than a $300 debugger.
Reply by ●March 12, 20102010-03-12
Any body tried the j-link debugger with(choices for compilers) GNU arm GCC
,Keil IDE(with all compilers which keil supports) and Cross works,Open OCD
only?
On Fri, Mar 12, 2010 at 3:29 PM, kevin_townsend2 wrote:
> > Yes, i got information that most of them are using J-link debugger.Will
> it
> > support for ARM7 and Cortex,ARM11 WITH ALL compilers?
>
> I'd say if you can afford to buy ALL compilers available for ARM, the price
> of an extra HW debugger or two should be peanuts when the real (rather than
> theoretical) need arises. The J-Link probably represents the most
> well-rounded option in terms of IDE/HW-support ... but if you want to work
> with every possible ARM platform known to man, it's going to cost a lot more
> money than a $300 debugger.
>
>
>
--
Raju Nalla
Application Engineer
Unistring Tech solution pvt Ltd
,Keil IDE(with all compilers which keil supports) and Cross works,Open OCD
only?
On Fri, Mar 12, 2010 at 3:29 PM, kevin_townsend2 wrote:
> > Yes, i got information that most of them are using J-link debugger.Will
> it
> > support for ARM7 and Cortex,ARM11 WITH ALL compilers?
>
> I'd say if you can afford to buy ALL compilers available for ARM, the price
> of an extra HW debugger or two should be peanuts when the real (rather than
> theoretical) need arises. The J-Link probably represents the most
> well-rounded option in terms of IDE/HW-support ... but if you want to work
> with every possible ARM platform known to man, it's going to cost a lot more
> money than a $300 debugger.
>
>
>
--
Raju Nalla
Application Engineer
Unistring Tech solution pvt Ltd
Reply by ●March 12, 20102010-03-12
I have just received an EKK-LM3S9B96 Stellaris evaluation kit; inside
there is an usb-jtag adapter based on a FTDI chip that has a jtag plus a
rs232-jtag interface. I think it would work with every common ide
because TI/Luminary sells the same kit for Keil, GCC/CodeSourcery and
IAR ide/compilers, it could be a cheaper alternative also compared with
Olimex USB-OCD also if you buy a Stellaris evaluation kit.
I will test with ARM ides and then I will post the results.
Raju N ha scritto:
>
> Any body tried the j-link debugger with(choices for compilers) GNU
> arm GCC ,Keil IDE(with all compilers which keil supports) and Cross
> works,Open OCD only?
>
> On Fri, Mar 12, 2010 at 3:29 PM, kevin_townsend2 > > wrote:
>
>
> > Yes, i got information that most of them are using J-link
> debugger.Will it
> > support for ARM7 and Cortex,ARM11 WITH ALL compilers?
>
> I'd say if you can afford to buy ALL compilers available for ARM,
> the price of an extra HW debugger or two should be peanuts when
> the real (rather than theoretical) need arises. The J-Link
> probably represents the most well-rounded option in terms of
> IDE/HW-support ... but if you want to work with every possible ARM
> platform known to man, it's going to cost a lot more money than a
> $300 debugger.
> --
> Raju Nalla
> Application Engineer
> Unistring Tech solution pvt Ltd
>
there is an usb-jtag adapter based on a FTDI chip that has a jtag plus a
rs232-jtag interface. I think it would work with every common ide
because TI/Luminary sells the same kit for Keil, GCC/CodeSourcery and
IAR ide/compilers, it could be a cheaper alternative also compared with
Olimex USB-OCD also if you buy a Stellaris evaluation kit.
I will test with ARM ides and then I will post the results.
Raju N ha scritto:
>
> Any body tried the j-link debugger with(choices for compilers) GNU
> arm GCC ,Keil IDE(with all compilers which keil supports) and Cross
> works,Open OCD only?
>
> On Fri, Mar 12, 2010 at 3:29 PM, kevin_townsend2 > > wrote:
>
>
> > Yes, i got information that most of them are using J-link
> debugger.Will it
> > support for ARM7 and Cortex,ARM11 WITH ALL compilers?
>
> I'd say if you can afford to buy ALL compilers available for ARM,
> the price of an extra HW debugger or two should be peanuts when
> the real (rather than theoretical) need arises. The J-Link
> probably represents the most well-rounded option in terms of
> IDE/HW-support ... but if you want to work with every possible ARM
> platform known to man, it's going to cost a lot more money than a
> $300 debugger.
> --
> Raju Nalla
> Application Engineer
> Unistring Tech solution pvt Ltd
>
