hi i am doing project of interfacing ads7825 with lpc2148
In that digital data coming from ads7825 is display onto LCD.
but no data is display onto LCD. i also put my code ads7825.rar
so help me
thanks in advance
urgent : need help for ads7825
Started by ●July 21, 2010
Reply by ●July 21, 20102010-07-21
Hello,
> hi i am doing project of interfacing ads7825 with lpc2148
> In that digital data coming from ads7825 is display onto LCD.
> but no data is display onto LCD. i also put my code ads7825.rar
> so help me
Perhaps no data is available to display ?
What have you already tried out ?
Where are you located ?
Best regards,
Martin
> hi i am doing project of interfacing ads7825 with lpc2148
> In that digital data coming from ads7825 is display onto LCD.
> but no data is display onto LCD. i also put my code ads7825.rar
> so help me
Perhaps no data is available to display ?
What have you already tried out ?
Where are you located ?
Best regards,
Martin
Reply by ●July 21, 20102010-07-21
i want to display digital data which is coming from ADS7825 IC.
no data is display on lcd.
In my code if there u find any error help me.
On Wed, Jul 21, 2010 at 4:47 PM, capiman26061973 wrote:
> Hello,
> > hi i am doing project of interfacing ads7825 with lpc2148
> > In that digital data coming from ads7825 is display onto LCD.
> > but no data is display onto LCD. i also put my code ads7825.rar
> > so help me
>
> Perhaps no data is available to display ?
>
> What have you already tried out ?
> Where are you located ?
>
> Best regards,
>
> Martin
>
>
>
no data is display on lcd.
In my code if there u find any error help me.
On Wed, Jul 21, 2010 at 4:47 PM, capiman26061973 wrote:
> Hello,
> > hi i am doing project of interfacing ads7825 with lpc2148
> > In that digital data coming from ads7825 is display onto LCD.
> > but no data is display onto LCD. i also put my code ads7825.rar
> > so help me
>
> Perhaps no data is available to display ?
>
> What have you already tried out ?
> Where are you located ?
>
> Best regards,
>
> Martin
>
>
>
Reply by ●July 21, 20102010-07-21
Hello Shweta,
> i want to display digital data which is coming from ADS7825 IC.
> no data is display on lcd.
> In my code if there u find any error help me.
it is your code, you must search your errors.
I am not getting paid for searching your errors, sorry.
But i (we) can help you to find your errors.
So again the question (as already posted in earlier email):
What have you already tried out ?
Best regards,
Martin
> i want to display digital data which is coming from ADS7825 IC.
> no data is display on lcd.
> In my code if there u find any error help me.
it is your code, you must search your errors.
I am not getting paid for searching your errors, sorry.
But i (we) can help you to find your errors.
So again the question (as already posted in earlier email):
What have you already tried out ?
Best regards,
Martin
Reply by ●July 22, 20102010-07-22
hi, i am interfacing ads7825 in parallel connection with lpc2148.
In that i am giving data to only one channel 0 and other channels are ground. i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of ADS7825 .But there is no effect of potentiometer.i am vary potentiometer but lcd display only 0v .
reply what can i do for that.
--- In l..., "capiman26061973" wrote:
> Hello Shweta,
>
> > i want to display digital data which is coming from ADS7825 IC.
> > no data is display on lcd.
> > In my code if there u find any error help me.
>
> it is your code, you must search your errors.
> I am not getting paid for searching your errors, sorry.
> But i (we) can help you to find your errors.
>
> So again the question (as already posted in earlier email):
> What have you already tried out ?
>
> Best regards,
>
> Martin
>
In that i am giving data to only one channel 0 and other channels are ground. i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of ADS7825 .But there is no effect of potentiometer.i am vary potentiometer but lcd display only 0v .
reply what can i do for that.
--- In l..., "capiman26061973" wrote:
> Hello Shweta,
>
> > i want to display digital data which is coming from ADS7825 IC.
> > no data is display on lcd.
> > In my code if there u find any error help me.
>
> it is your code, you must search your errors.
> I am not getting paid for searching your errors, sorry.
> But i (we) can help you to find your errors.
>
> So again the question (as already posted in earlier email):
> What have you already tried out ?
>
> Best regards,
>
> Martin
>
Reply by ●July 22, 20102010-07-22
Am 22.07.2010 12:31, schrieb shweta:
> hi, i am interfacing ads7825 in parallel connection with lpc2148.
> In that i am giving data to only one channel 0 and other channels are ground. i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of ADS7825 .But there is no effect of potentiometer.i am vary potentiometer but lcd display only 0v .
> reply what can i do for that.
Debug it. Measure it. Fix it.
What do you expect as answer ?
Maybe: I have done the same, here is the source code free of charge. ;-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
> hi, i am interfacing ads7825 in parallel connection with lpc2148.
> In that i am giving data to only one channel 0 and other channels are ground. i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of ADS7825 .But there is no effect of potentiometer.i am vary potentiometer but lcd display only 0v .
> reply what can i do for that.
Debug it. Measure it. Fix it.
What do you expect as answer ?
Maybe: I have done the same, here is the source code free of charge. ;-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
Reply by ●July 22, 20102010-07-22
sorry, where is your source code?
reply
On Thu, Jul 22, 2010 at 4:09 PM, 42Bastian wrote:
> Am 22.07.2010 12:31, schrieb shweta:
>
> > hi, i am interfacing ads7825 in parallel connection with lpc2148.
> > In that i am giving data to only one channel 0 and other channels are
> ground. i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of
> ADS7825 .But there is no effect of potentiometer.i am vary potentiometer but
> lcd display only 0v .
> > reply what can i do for that.
>
> Debug it. Measure it. Fix it.
>
> What do you expect as answer ?
> Maybe: I have done the same, here is the source code free of charge. ;-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
reply
On Thu, Jul 22, 2010 at 4:09 PM, 42Bastian wrote:
> Am 22.07.2010 12:31, schrieb shweta:
>
> > hi, i am interfacing ads7825 in parallel connection with lpc2148.
> > In that i am giving data to only one channel 0 and other channels are
> ground. i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of
> ADS7825 .But there is no effect of potentiometer.i am vary potentiometer but
> lcd display only 0v .
> > reply what can i do for that.
>
> Debug it. Measure it. Fix it.
>
> What do you expect as answer ?
> Maybe: I have done the same, here is the source code free of charge. ;-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
Reply by ●July 22, 20102010-07-22
Am 22.07.2010 13:14, schrieb Shweta Parmar:
>> What do you expect as answer ?
>> Maybe: I have done the same, here is the source code free of charge. ;-)
> sorry, where is your source code?
> reply
*ROTFL*, you made my day :-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
>> What do you expect as answer ?
>> Maybe: I have done the same, here is the source code free of charge. ;-)
> sorry, where is your source code?
> reply
*ROTFL*, you made my day :-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
Reply by ●July 22, 20102010-07-22
i can't see your source code so your code into the file section.
sorry again
On Thu, Jul 22, 2010 at 4:58 PM, 42Bastian wrote:
> Am 22.07.2010 13:14, schrieb Shweta Parmar:
>
> >> What do you expect as answer ?
> >> Maybe: I have done the same, here is the source code free of charge.
> ;-)
> >
> >
> > sorry, where is your source code?
> > reply
>
> *ROTFL*, you made my day :-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
> Yahoo! Groups Links
sorry again
On Thu, Jul 22, 2010 at 4:58 PM, 42Bastian wrote:
> Am 22.07.2010 13:14, schrieb Shweta Parmar:
>
> >> What do you expect as answer ?
> >> Maybe: I have done the same, here is the source code free of charge.
> ;-)
> >
> >
> > sorry, where is your source code?
> > reply
>
> *ROTFL*, you made my day :-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
> Yahoo! Groups Links
Reply by ●July 22, 20102010-07-22
Am 22.07.2010 13:37, schrieb Shweta Parmar:
> i can't see your source code so your code into the file section.
> sorry again
It was meant ironical, as a joke. I do not have any source code for this.
Debug your code.
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
> i can't see your source code so your code into the file section.
> sorry again
It was meant ironical, as a joke. I do not have any source code for this.
Debug your code.
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+