my project is the development of CAN driver for LPC2129 with IAR and OSEK
I have a problem to debug for this project
I joined ORTI pluguin (pluguin of which is the OSEK on IAR), but the problem is
when I run the debugger opens a window that asks me to integrate a .ort file
This file is the configuration file ORTI.
but I do not know where I can download it
IAR for ARM pluguin ORTI don't found .ort file
Started by ●October 18, 2010
Reply by ●October 18, 20102010-10-18
Am 18.10.2010 13:19, schrieb zied130187:
>
> my project is the development of CAN driver for LPC2129 with IAR and OSEK
>
> I have a problem to debug for this project
>
> I joined ORTI pluguin (pluguin of which is the OSEK on IAR), but the problem is when I run the debugger opens a window that asks me to integrate a .ort file
>
> This file is the configuration file ORTI.
>
> but I do not know where I can download it
Nowhere. It configures your OSEK. So it must be part of your project.
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
>
> my project is the development of CAN driver for LPC2129 with IAR and OSEK
>
> I have a problem to debug for this project
>
> I joined ORTI pluguin (pluguin of which is the OSEK on IAR), but the problem is when I run the debugger opens a window that asks me to integrate a .ort file
>
> This file is the configuration file ORTI.
>
> but I do not know where I can download it
Nowhere. It configures your OSEK. So it must be part of your project.
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
Reply by ●October 18, 20102010-10-18
--- In l..., 42Bastian wrote:
>
> Am 18.10.2010 13:19, schrieb zied130187:
> >
> > my project is the development of CAN driver for LPC2129 with IAR and OSEK
> >
> > I have a problem to debug for this project
> >
> > I joined ORTI pluguin (pluguin of which is the OSEK on IAR), but the problem is when I run the debugger opens a window that asks me to integrate a .ort file
> >
> > This file is the configuration file ORTI.
> >
> > but I do not know where I can download it
>
> Nowhere. It configures your OSEK. So it must be part of your project.
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
it is not among the project's config file.
I just add a pluguin (. dll) for IAR and I add this pluguin to my project.
in this pdf, in the end of page 2
http://ftp.iar.se/WWWfiles/guides/ORTI_PluginReference.pdf
they say that this file is generated by the vendor of OSEK.
but I isn't buying OSEK and I don't know if there are open source version that contains this file .ort
>
> Am 18.10.2010 13:19, schrieb zied130187:
> >
> > my project is the development of CAN driver for LPC2129 with IAR and OSEK
> >
> > I have a problem to debug for this project
> >
> > I joined ORTI pluguin (pluguin of which is the OSEK on IAR), but the problem is when I run the debugger opens a window that asks me to integrate a .ort file
> >
> > This file is the configuration file ORTI.
> >
> > but I do not know where I can download it
>
> Nowhere. It configures your OSEK. So it must be part of your project.
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
it is not among the project's config file.
I just add a pluguin (. dll) for IAR and I add this pluguin to my project.
in this pdf, in the end of page 2
http://ftp.iar.se/WWWfiles/guides/ORTI_PluginReference.pdf
they say that this file is generated by the vendor of OSEK.
but I isn't buying OSEK and I don't know if there are open source version that contains this file .ort
