Dear,
I'm using the usb host lite code on an Embedded Artist LPC2478 board. The
Host_WDHWait always hangs.
When I insert an USB stick, only one interrupt is generated.
I assume that my USB initialization is not correct. Any hint?
Your comments are appreciated!
Thanks,
Bart
LPC2478 usb host lite hangs one Host_WDHWait
Started by ●June 29, 2011
Reply by ●June 30, 20112011-06-30
The HostLite example doesn't support hot plug, insert
the USB stick first, then run the example.
Tom
--- In l..., "bart.deboeck" wrote:
>
> Dear,
>
> I'm using the usb host lite code on an Embedded Artist LPC2478 board. The Host_WDHWait always hangs.
>
> When I insert an USB stick, only one interrupt is generated.
>
> I assume that my USB initialization is not correct. Any hint?
>
> Your comments are appreciated!
>
> Thanks,
> Bart
>
the USB stick first, then run the example.
Tom
--- In l..., "bart.deboeck" wrote:
>
> Dear,
>
> I'm using the usb host lite code on an Embedded Artist LPC2478 board. The Host_WDHWait always hangs.
>
> When I insert an USB stick, only one interrupt is generated.
>
> I assume that my USB initialization is not correct. Any hint?
>
> Your comments are appreciated!
>
> Thanks,
> Bart
>