Forums

Error in LPC213x users manual

Started by rggmns June 20, 2005
Hello,
I have spend some time in getting the ADC on the move.
The users manual states on page 198 that the ADC inputs are always
connected to the I/O pins of the LPC. This is NOT correct.
You DO HAVE TO use the PINSEL registers to connect the ADC inputs with
the I/O connections.

My users manual is release November 22 2004. If there is a more recent
manual, please tell me where to find it.


An Engineer's Guide to the LPC2100 Series

Seems to me that the user manual is not available for this variant.
What manual are you reading?

--- In lpc2000@lpc2..., "rggmns" <rggmns@y...> wrote:
> Hello,
> I have spend some time in getting the ADC on the move.
> The users manual states on page 198 that the ADC inputs are always
> connected to the I/O pins of the LPC. This is NOT correct.
> You DO HAVE TO use the PINSEL registers to connect the ADC inputs with
> the I/O connections.
>
> My users manual is release November 22 2004. If there is a more recent
> manual, please tell me where to find it.


--- In lpc2000@lpc2..., "flying_wookie1" <flying_wookie@h...>
wrote:
> Seems to me that the user manual is not available for this variant.
> What manual are you reading?

as he said, the 22nov04 manual.. wich is the only one I know.
available in the file section of this Yahoo group for exemple..