Newbie basic JTAG questions

Started by clas333 February 7, 2004
Hi all,

I am already using GDB with the original Wiggler and
OCDLibRemote (MacGraigor) to debug an AT91M55800A (ATMEL) board.

I have the following questions:
1. Can I used this same setup to debug an LPC2100 board ?
2. Does OCDLibRemote supports the LPC2100 ?
3. Do I have to burn the flash every time I want to debug
a program, if its size is larger than the RAM size ? Regards,
Claudio L.

An Engineer's Guide to the LPC2100 Series