Forums

Re: New poll for lpc2000

Started by daed...@... September 27, 2005
The question I have is why the restriction of removing one pin from each side? That really limits the possibilities...

-------------- Original message --------------

Enter your vote today! A new poll has been created for the
lpc2000 group:

Rules:
need to take off one pin from each side of the LQFP48.
JTAG pins, Vdd, Vss and UART0 pins are not an option. Try
to keep as much as possible functionality. Using these
rules please select 4 pins. Data Sheet can be found here:
http://www.standardics.philips.com/products/lpc2000/pdf/lpc
2101_2102_2103.pdf
Chapter 5 (Page 4) has the pinout information

o Pin1
o Pin2
o Pin3
o Pin18
o Pin21
o Pin22
o Pin23
o Pin24
o Pin28
o Pin29
o Pin30
o Pin32
o Pin33
o Pin34
o Pin35
o Pin36
o Pin37
o Pin38
o Pin39
o Pin41
o Pin44
o Pin45
o Pin46
o Pin47
o Pin48 To vote, please visit the following web page:
http://groups.yahoo.com/group/lpc2000/surveys?id143932

Note: Please do not reply to this message. Poll votes are
not collected via email. To vote, you must go to the Yahoo! Groups
web site listed above.

Thanks!

YAHOO! GROUPS LINKS


An Engineer's Guide to the LPC2100 Series