Forums

Olimex LPC-e2124 webserver with FreeRTOS

Started by jpr_hh October 12, 2005
Hi

i an using an Olimex Lpc-e2124 Board. For programming i use WinARM
because it is for free.
At the end freeRTOS and the rowlley TCP/IP Stack should work on this
Board. I know I am not The first posting problems with this but the
older postings did not help me.
May be somebody knows a little bit about WinARM, FreeRTOS and the board.
My problem is:
-The examples Files are made for the LPC2106 but i thing/hope i will
not be a problem to change the registerlabels and Adresses to my
Prozessor.
-i need a Projectfile: so i took an old one and deleted everything i
o not need an included the Kernelfiles, the Port.c and a Main.c, the
makefileform the 2106 example, the crt0.s(because it was in hte old
one but i do not know it is nessessary) and FreeRTOSConfig.h

Is this right? and has somebody done an new makefile for the board?
Or is it easyer to download the rowly arm demo an bulid the demo
application? it is noy f 30 days for free.....

regards
JP



An Engineer's Guide to the LPC2100 Series

Perhaps you'd like to take a look at the Ethernut port to the LPC-E2124
and using that as a base?

http://www.usbdip.de/en/ethernut2294/index.html

The LPC-E2124 software seems to work for me. Jon updated it for our new
distributions.

Regards,

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for MSP430, ARM, AVR and now MAXQ processors

> -----Original Message-----
> From: jpr_hh [mailto:jpr_hh@jpr_...]
> Sent: 12 October 2005 11:42
> To: lpc2000@lpc2...
> Subject: [lpc2000] Olimex LPC-e2124 webserver with FreeRTOS
>
> Hi
>
> i an using an Olimex Lpc-e2124 Board. For programming i use
> WinARM because it is for free.
> At the end freeRTOS and the rowlley TCP/IP Stack should work
> on this Board. I know I am not The first posting problems
> with this but the older postings did not help me.
> May be somebody knows a little bit about WinARM, FreeRTOS and
> the board.
> My problem is:
> -The examples Files are made for the LPC2106 but i thing/hope
> i will not be a problem to change the registerlabels and
> Adresses to my Prozessor.
> -i need a Projectfile: so i took an old one and deleted
> everything i o not need an included the Kernelfiles, the
> Port.c and a Main.c, the makefileform the 2106 example, the
> crt0.s(because it was in hte old one but i do not know it is
> nessessary) and FreeRTOSConfig.h
>
> Is this right? and has somebody done an new makefile for the board?
> Or is it easyer to download the rowly arm demo an bulid the
> demo application? it is noy f 30 days for free.....
>
> regards
> JP > ------------------------ Yahoo! Groups Sponsor
> --------------------~--> Get Bzzzy! (real tools to help you
> find a job). Welcome to the Sweet Life.
> http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dN_tlB/TM
> --------------------------
> ------~- > Yahoo! Groups Links >