the reason was, that main.c file was set to ARM mode.
It's working now however vErrorChecks() function is showing, that none
of task has ended after 300ms.
robert
rseku wrote:
> Thanks
> I just sent the FreeRTOS directory to Richard.
> I will post to this group if we find anything.
> I noticed there was no port to LPC213x group yet, I might take an
> example from.
>
> robert
>
> Guillermo Prandi wrote:
>
>>Richard, I wouldn't mind hearing about Robert's problem and
his
>>resolution.
>>
>>Guille
>>
>>--- In lpc2000@lpc2..., "FreeRTOS Info" <nospam@F...>
wrote:
>>
>>
>>>>I have the latest (I think version of FreeRTOS ) but there is
>>
>>neither
>>
>>
>>>>system folder in this example nor crt0.s.
>>>
>>>? Either you are looking in the wrong place or this is not a
>>
>>project from
>>
>>
>>>the download. As per my post, I'm talking about a folder shown
in
>>
>>the
>>
>>
>>>project explorer within the CrossWorks IDE, not a directory within
>>
>>the
>>
>>
>>>source tree. Do you have the project explorer window open?
>>
>>Select "project
>>
>>
>>>explorer" from the View menu in the IDE if not.
>>>
>>>If you could send your project as per my previous request then I
>>
>>should be
>>
>>
>>>able to find the problem. In the mean time I think we should
>>
>>continue this
>>
>>
>>>discussion on the FreeRTOS support forum as the thread is getting
>>
>>quite long
>>
>>
>>>and is not likely to be of general interest to others on this
group.
>>>
>>>Support forum can be found here:
>>>http://sourceforge.net/forum/forum.php?forum_id82005
>>>
>>>Regards,
>>>Richard.
>>>
>>>
>>>http://www.FreeRTOS.org
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
> Yahoo! Groups Links
>
>
FREERTOS problem on gcc and LPC2138
Started by ●October 21, 2005
Reply by ●October 24, 20052005-10-24
Reply by ●October 24, 20052005-10-24
It's good to know. In my case, the problem was *exactly* being in the
wrong processor mode. I tried to copy all the relevant lines when
merging my code with FreeRTOS, but I missed that particularly
important instruction in the startup code.
Guille
--- In lpc2000@lpc2..., rseku <rseku@p...> wrote:
>
> the reason was, that main.c file was set to ARM mode.
> It's working now however vErrorChecks() function is showing, that
none
> of task has ended after 300ms.
> robert
> rseku wrote:
>
> > Thanks
> > I just sent the FreeRTOS directory to Richard.
> > I will post to this group if we find anything.
> > I noticed there was no port to LPC213x group yet, I might take an
> > example from.
> >
> > robert
> >
> > Guillermo Prandi wrote:
> >
> >>Richard, I wouldn't mind hearing about Robert's problem and his
> >>resolution.
> >>
> >>Guille
> >>
> >>--- In lpc2000@lpc2..., "FreeRTOS Info" <nospam@F...>
wrote:
> >>
> >>
> >>>>I have the latest (I think version of FreeRTOS ) but there is
> >>
> >>neither
> >>
> >>
> >>>>system folder in this example nor crt0.s.
> >>>
> >>>? Either you are looking in the wrong place or this is not a
> >>
> >>project from
> >>
> >>
> >>>the download. As per my post, I'm talking about a folder shown
in
> >>
> >>the
> >>
> >>
> >>>project explorer within the CrossWorks IDE, not a directory
within
> >>
> >>the
> >>
> >>
> >>>source tree. Do you have the project explorer window open?
> >>
> >>Select "project
> >>
> >>
> >>>explorer" from the View menu in the IDE if not.
> >>>
> >>>If you could send your project as per my previous request then I
> >>
> >>should be
> >>
> >>
> >>>able to find the problem. In the mean time I think we should
> >>
> >>continue this
> >>
> >>
> >>>discussion on the FreeRTOS support forum as the thread is
getting
> >>
> >>quite long
> >>
> >>
> >>>and is not likely to be of general interest to others on this
group.
> >>>
> >>>Support forum can be found here:
> >>>http://sourceforge.net/forum/forum.php?forum_id82005
> >>>
> >>>Regards,
> >>>Richard.
> >>>
> >>>
> >>>http://www.FreeRTOS.org
> >>>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
wrong processor mode. I tried to copy all the relevant lines when
merging my code with FreeRTOS, but I missed that particularly
important instruction in the startup code.
Guille
--- In lpc2000@lpc2..., rseku <rseku@p...> wrote:
>
> the reason was, that main.c file was set to ARM mode.
> It's working now however vErrorChecks() function is showing, that
none
> of task has ended after 300ms.
> robert
> rseku wrote:
>
> > Thanks
> > I just sent the FreeRTOS directory to Richard.
> > I will post to this group if we find anything.
> > I noticed there was no port to LPC213x group yet, I might take an
> > example from.
> >
> > robert
> >
> > Guillermo Prandi wrote:
> >
> >>Richard, I wouldn't mind hearing about Robert's problem and his
> >>resolution.
> >>
> >>Guille
> >>
> >>--- In lpc2000@lpc2..., "FreeRTOS Info" <nospam@F...>
wrote:
> >>
> >>
> >>>>I have the latest (I think version of FreeRTOS ) but there is
> >>
> >>neither
> >>
> >>
> >>>>system folder in this example nor crt0.s.
> >>>
> >>>? Either you are looking in the wrong place or this is not a
> >>
> >>project from
> >>
> >>
> >>>the download. As per my post, I'm talking about a folder shown
in
> >>
> >>the
> >>
> >>
> >>>project explorer within the CrossWorks IDE, not a directory
within
> >>
> >>the
> >>
> >>
> >>>source tree. Do you have the project explorer window open?
> >>
> >>Select "project
> >>
> >>
> >>>explorer" from the View menu in the IDE if not.
> >>>
> >>>If you could send your project as per my previous request then I
> >>
> >>should be
> >>
> >>
> >>>able to find the problem. In the mean time I think we should
> >>
> >>continue this
> >>
> >>
> >>>discussion on the FreeRTOS support forum as the thread is
getting
> >>
> >>quite long
> >>
> >>
> >>>and is not likely to be of general interest to others on this
group.
> >>>
> >>>Support forum can be found here:
> >>>http://sourceforge.net/forum/forum.php?forum_id82005
> >>>
> >>>Regards,
> >>>Richard.
> >>>
> >>>
> >>>http://www.FreeRTOS.org
> >>>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>