Crossworks problem

Started by bruno3955 February 10, 2006
I use the Crossworks for MSP430 evolution version and it seems to me
that it have a problem, when I declare two or more interrupts in one
assembler file, the linker only see the first interrupt vector. In the
example below, the linker only charge in the interrupt vector table,
the address for the Port 1 interrupt.

             ORG      PORT1_VECTOR
             DW      _ZC_ISR    
             ORG      TIMERA1_VECTOR
             DW      _TA_ISR    

Beginning Microcontrollers with the MSP430