Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Regarding CCE 2.0
Started by ●April 12, 2008
Reply by ●April 12, 20082008-04-12
in cce do following settings..
go to menu windows--> preferences-->c/c++-->debug-->msp430 debugger.
in msp430 debugger select the device u are using and select the proper port either LPT1 or LPT2 or USB emulation, whichever u are using and then click ok.
it might be possible that these options are different in project properties and in preferences.. so do the above settings in preferences also..
if still it doesnt work then their might be loose connection of you board.
"paddu.koti" wrote: Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Nishit Shah
Edutech Systems
__________________________________________________
go to menu windows--> preferences-->c/c++-->debug-->msp430 debugger.
in msp430 debugger select the device u are using and select the proper port either LPT1 or LPT2 or USB emulation, whichever u are using and then click ok.
it might be possible that these options are different in project properties and in preferences.. so do the above settings in preferences also..
if still it doesnt work then their might be loose connection of you board.
"paddu.koti" wrote: Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Nishit Shah
Edutech Systems
__________________________________________________
Reply by ●April 12, 20082008-04-12
Check your firewall.
Pascal
De : m... [mailto:m...] De la part de
paddu.koti
Envoy: samedi 12 avril 2008 05:12
: m...
Objet : [msp430] Regarding CCE 2.0
Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Pascal
De : m... [mailto:m...] De la part de
paddu.koti
Envoy: samedi 12 avril 2008 05:12
: m...
Objet : [msp430] Regarding CCE 2.0
Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Reply by ●April 12, 20082008-04-12
Pascal wrote: Check your firewall.
Pascal
De : m... [mailto:m...] De la part de
paddu.koti
Envoy: samedi 12 avril 2008 05:12
: m...
Objet : [msp430] Regarding CCE 2.0
Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Nishit Shah
Edutech Systems
__________________________________________________
Pascal
De : m... [mailto:m...] De la part de
paddu.koti
Envoy: samedi 12 avril 2008 05:12
: m...
Objet : [msp430] Regarding CCE 2.0
Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Nishit Shah
Edutech Systems
__________________________________________________
Reply by ●April 13, 20082008-04-13
i was getting same error.. problem was one of the jumper connecting my power
supply to controller and JTAG ic was not there.. as soon as i placed jumper
everything was working fine...
"paddu.koti" wrote: Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Nishit Shah
Edutech Systems
__________________________________________________
"paddu.koti" wrote: Hi,
I am new to the development tool CCE from TI.
I was using IAR, recently I installed CCE 2.0 and tried debugging
the source code in CCE 2.0(source code previously witten in IAR).
I am able to compile the code, but when I try to Debug I am getting
following error.
------------------
Error creating session
Target Server Open failed
GDB output trace
Current language (null)
Starting target sserver....
Could not find device (or device not supported)
-------------------
I have made proper settings in Debug Properties
(such as connection,Device,JTAG protocol etc..)
If anybody has knowledge about this error please guide me.
thankyou and best regards...
Nishit Shah
Edutech Systems
__________________________________________________
Reply by ●April 14, 20082008-04-14
Thankyou everyone for your kind reply.
The problem was in the settings.
best regards...
--- In m..., "paddu.koti" wrote:
>
> Hi,
>
> I am new to the development tool CCE from TI.
> I was using IAR, recently I installed CCE 2.0 and tried debugging
> the source code in CCE 2.0(source code previously witten in IAR).
> I am able to compile the code, but when I try to Debug I am
getting
> following error.
>
> ------------------
> Error creating session
>
> Target Server Open failed
>
> GDB output trace
>
> Current language (null)
> Starting target sserver....
> Could not find device (or device not supported)
> -------------------
> I have made proper settings in Debug Properties
> (such as connection,Device,JTAG protocol etc..)
> If anybody has knowledge about this error please guide me.
>
> thankyou and best regards...
>
The problem was in the settings.
best regards...
--- In m..., "paddu.koti" wrote:
>
> Hi,
>
> I am new to the development tool CCE from TI.
> I was using IAR, recently I installed CCE 2.0 and tried debugging
> the source code in CCE 2.0(source code previously witten in IAR).
> I am able to compile the code, but when I try to Debug I am
getting
> following error.
>
> ------------------
> Error creating session
>
> Target Server Open failed
>
> GDB output trace
>
> Current language (null)
> Starting target sserver....
> Could not find device (or device not supported)
> -------------------
> I have made proper settings in Debug Properties
> (such as connection,Device,JTAG protocol etc..)
> If anybody has knowledge about this error please guide me.
>
> thankyou and best regards...
>
Reply by ●April 14, 20082008-04-14
I came to know that ,this problem may arise when there is a
requirement in updation in emulator's firmware.
thankyou and regards...
--- In m..., "paddu.koti" wrote:
>
> Hi,
>
> I am new to the development tool CCE from TI.
> I was using IAR, recently I installed CCE 2.0 and tried debugging
> the source code in CCE 2.0(source code previously witten in IAR).
> I am able to compile the code, but when I try to Debug I am
getting
> following error.
>
> ------------------
> Error creating session
>
> Target Server Open failed
>
> GDB output trace
>
> Current language (null)
> Starting target sserver....
> Could not find device (or device not supported)
> -------------------
> I have made proper settings in Debug Properties
> (such as connection,Device,JTAG protocol etc..)
> If anybody has knowledge about this error please guide me.
>
> thankyou and best regards...
>
requirement in updation in emulator's firmware.
thankyou and regards...
--- In m..., "paddu.koti" wrote:
>
> Hi,
>
> I am new to the development tool CCE from TI.
> I was using IAR, recently I installed CCE 2.0 and tried debugging
> the source code in CCE 2.0(source code previously witten in IAR).
> I am able to compile the code, but when I try to Debug I am
getting
> following error.
>
> ------------------
> Error creating session
>
> Target Server Open failed
>
> GDB output trace
>
> Current language (null)
> Starting target sserver....
> Could not find device (or device not supported)
> -------------------
> I have made proper settings in Debug Properties
> (such as connection,Device,JTAG protocol etc..)
> If anybody has knowledge about this error please guide me.
>
> thankyou and best regards...
>
