I had written this tutorial for beginners some time ago.

http://referencedesigner.com/tutorials/msp430/msp430_01.php

I would like members' feedback. Also I am looking for any volunteer to contribute to this tutorial to extend it. The contributors' name and details ( email, web address etc.) will be included.

Let me know if anyone is interested.

Vikas Shukla

Start a New Thread

Hi Vikas,
First of all your tutorials have been a great help for me. They are very
easy to understand and a really nice initiative.

At the same time I would like to point out a few things:-
1.The links for the tutorials on Serial port comm ,PWM and 'Using funcions'
are broken.
2.The C program mentioned in the ' LED ON and OFF Program' doesn't work
because there is a 'return 0' command at the end(same goes for the rest of
the programs).
3.Also the header file should be 'msp430x14x.h' instead of 'io430x14x.h'
---For this I am not sure, others please correct.
4.In the 'Understand your Hardware' section you have shown the image of
Olimexmsp430F169 board but in all your programs you ar using programs for
msp430F149 ----for a newbies like me it takes a lill time to understand the
difference.
Thats it for now. If you have not yet written tutorial for the Serial port
communication I would like to contribute. Tell me if I can pool-in.

Best regards and thx,

Pranay
www.pranaysharma.in
On Wed, May 6, 2009 at 6:26 PM, for_si2003 wrote:

> I had written this tutorial for beginners some time ago.
>
> http://referencedesigner.com/tutorials/msp430/msp430_01.php
>
> I would like members' feedback. Also I am looking for any volunteer to
> contribute to this tutorial to extend it. The contributors' name and details
> ( email, web address etc.) will be included.
>
> Let me know if anyone is interested.
>
> Vikas Shukla
>
>

--
Pranay Sharma
-
Project Consultant,
Indian Institute of Technology-Delhi,India
Contact :+91-9873425256, 011-27865061
Email Id : p...@nsitmotorsports.com,
m...@gmail.com
Website :www.pranaysharma.in


Start a New Thread

Pranay,

I am impressed with your credentials and your initiatives. I have sent you an email separately. I would like you to contribute. I hope that this will be helpful to the janata in general.

Vikas Shukla

--- In m..., Pranay Sharma wrote:
>
> Hi Vikas,
> First of all your tutorials have been a great help for me. They are very
> easy to understand and a really nice initiative.
>
> At the same time I would like to point out a few things:-
> 1.The links for the tutorials on Serial port comm ,PWM and 'Using funcions'
> are broken.
> 2.The C program mentioned in the ' LED ON and OFF Program' doesn't work
> because there is a 'return 0' command at the end(same goes for the rest of
> the programs).
> 3.Also the header file should be 'msp430x14x.h' instead of 'io430x14x.h'
> ---For this I am not sure, others please correct.
> 4.In the 'Understand your Hardware' section you have shown the image of
> Olimexmsp430F169 board but in all your programs you ar using programs for
> msp430F149 ----for a newbies like me it takes a lill time to understand the
> difference.
> Thats it for now. If you have not yet written tutorial for the Serial port
> communication I would like to contribute. Tell me if I can pool-in.
>
> Best regards and thx,
>
> Pranay
> www.pranaysharma.in
> On Wed, May 6, 2009 at 6:26 PM, for_si2003 wrote:
>
> >
> >
> > I had written this tutorial for beginners some time ago.
> >
> > http://referencedesigner.com/tutorials/msp430/msp430_01.php
> >
> > I would like members' feedback. Also I am looking for any volunteer to
> > contribute to this tutorial to extend it. The contributors' name and details
> > ( email, web address etc.) will be included.
> >
> > Let me know if anyone is interested.
> >
> > Vikas Shukla
> >
> >
> >
> > --
> Pranay Sharma
> -
> Project Consultant,
> Indian Institute of Technology-Delhi,India
> Contact :+91-9873425256, 011-27865061
> Email Id : pranay@...,
> mynameispranay@...
> Website :www.pranaysharma.in
>
>

Start a New Thread