Hi,
I am using CC430F1537 system on chip for some of the experiments.From the data
sheet I got to know that, the radio uses 26MHz clock.But I like to verify it
using a timer or an oscilloscope.
Can you please suggest any method to measure the radio clock frequency.
Thanks,
Sandeep.
Reg: CC430F5137 Clock Frequency
Started by ●July 18, 2013
Reply by ●July 18, 20132013-07-18
Sandeep,
If you have a short wave radio with a beat frequency oscillator you should
be able to hear it. Tune the radio to the clock frequency and twiddle the
VFO control and you should hear an audio tone. Verify it is from your
processor by turning it off, if the audio tone goes, it is.
Hope this helps,
Steve
[Non-text portions of this message have been removed]
If you have a short wave radio with a beat frequency oscillator you should
be able to hear it. Tune the radio to the clock frequency and twiddle the
VFO control and you should hear an audio tone. Verify it is from your
processor by turning it off, if the audio tone goes, it is.
Hope this helps,
Steve
[Non-text portions of this message have been removed]