MPLAB 8.33 hanging

Started by jsternmd September 5, 2009
I have a new problem where MPLAB assembler is hanging during the

Executing: "O:\Program Files\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F877A "Test.asm" /l"Test.lst" /e"Test.err" /d__DEBUG=1

When I look at the lst or err files they are empty.

Anyone experience this? I made only minor changes to my code which haf been assembling in debug or release very nicely.

thanks

Jerry

At 07:20 PM 9/4/2009, jsternmd wrote:
>I have a new problem where MPLAB assembler is hanging during the
>
>Executing: "O:\Program Files\Microchip\MPASM Suite\MPASMWIN.exe" /q
>/p16F877A "Test.asm" /l"Test.lst" /e"Test.err" /d__DEBUG=1
>
>When I look at the lst or err files they are empty.
>
>Anyone experience this? I made only minor changes to my code which
>haf been assembling in debug or release very nicely.

Do you have one of the intermediate or output files open? A file
viewer or editor, perhaps?

Disk full?

dwayne

--
Dwayne Reid
Trinity Electronics Systems Ltd Edmonton, AB, CANADA
(780) 489-3199 voice (780) 487-6397 fax
www.trinity-electronics.com
Custom Electronics Design and Manufacturing

I think I found the problem I had renamed the filename for the asm file
with a decimal symbol in it; eg "test v0.90.asm" Although that's fine
for windows, MPLAB didn't like the extra "."

Now seems to be OK once I renamed it "test v090.asm"

Thanks
jerry

-----Original Message-----
From: p... [mailto:p...] On Behalf
Of Dwayne Reid
Sent: Saturday, September 05, 2009 1:31 AM
To: p...
Subject: Re: [piclist] MPLAB 8.33 hanging
At 07:20 PM 9/4/2009, jsternmd wrote:
>I have a new problem where MPLAB assembler is hanging during the
>
>Executing: "O:\Program Files\Microchip\MPASM Suite\MPASMWIN.exe" /q
>/p16F877A "Test.asm" /l"Test.lst" /e"Test.err" /d__DEBUG=1
>
>When I look at the lst or err files they are empty.
>
>Anyone experience this? I made only minor changes to my code which
>haf been assembling in debug or release very nicely.

Do you have one of the intermediate or output files open? A file
viewer or editor, perhaps?

Disk full?

dwayne

--
Dwayne Reid
Trinity Electronics Systems Ltd Edmonton, AB, CANADA
(780) 489-3199 voice (780) 487-6397 fax
www.trinity-electronics.com
Custom Electronics Design and Manufacturing



to unsubscribe, go to http://www.yahoogroups.com and follow the
instructions