|
Hello all, Is there programming software out there other than XWisp and Wisp that is compatible with the Wisp628 programmer? TIA for any replies. Regards, Stephen Barnes |
|
|
Wisp628
Started by ●June 27, 2003
Reply by ●June 30, 20032003-06-30
|
> Is there programming software out there other than XWisp and Wisp that is > compatible with the Wisp628 programmer? Bumblebee, http://home.hccnet.nl/d.a.kuipers/pic/bumblebee/ But the current version does not work with the PIC18 series. BTW, the XWisp is easier to use once you get used to that python thing it runs on. |
Reply by ●June 30, 20032003-06-30
|
Thanks for the reply, I'll check it out!
Regards,
Steve
|
Reply by ●February 28, 20052005-02-28
|
Hi all, I just bought a Wisp628 and I see on the Wouter's web page that the software doesn't work on Win2K. Is there other software for it that does? Or is there a driver that I need? Also, it doesn't list support for the 16F88. Is this just outdated information or am I out of luck? Mike |
|
|
Reply by ●March 1, 20052005-03-01
|
I use Wisp628 with Xwisp2 which is supposed to work on any win95 and up
machine (haven't tried it on 2K). The device list supports the 16F88. You can get it here: http://www.robh.nl/picsoft.html Eugene upand_at_them wrote:
-- Eugene S. Gopalan Systems Manager Sierra Technology (M) S/B No 27, Jalan SS 25/41 Mayang Industrial Park 47301 Petaling Jaya Selangor, Malaysia. Tel: 603 78063966 Fax: 603 78063900 |
Reply by ●March 1, 20052005-03-01
