Connecting RLT8019AS with PIC16F877 - How to start?

Started by newbietalk August 8, 2003
hi,

I'm required to connect a RLT8019AS with a PIC16F877 for my
project, and I'm very new to this.

How do I start? Does the RLT8019AS needed to be programmed by
a programmer? Can I use EEPROM within the PIC16F877 to
initialize RLT8019AS? Is it easier to use jumper mode to
initialize RLT8019AS? Thanks guys,

newbieTalk



ouch, that looks like a lot of work. why not just grab a device like a
SitePlayer or similar, and use it for network communications? They're
cheap and easy to work with, http:www.siteplayer.com. --- newbietalk <> wrote:
> hi,
>
> I'm required to connect a RLT8019AS with a PIC16F877 for my
> project, and I'm very new to this.
>
> How do I start? Does the RLT8019AS needed to be programmed by
> a programmer? Can I use EEPROM within the PIC16F877 to
> initialize RLT8019AS? Is it easier to use jumper mode to
> initialize RLT8019AS? > Thanks guys,
>
> newbieTalk


__________________________________




What is a RLT8019AS?
----- Original Message -----
From: newbietalk
To: p...@yahoogroups.com
Sent: Friday, August 08, 2003 9:19 AM
Subject: [piclist] Connecting RLT8019AS with PIC16F877 - How to start?

hi,

I'm required to connect a RLT8019AS with a PIC16F877 for my
project, and I'm very new to this.

How do I start? Does the RLT8019AS needed to be programmed by
a programmer? Can I use EEPROM within the PIC16F877 to
initialize RLT8019AS? Is it easier to use jumper mode to
initialize RLT8019AS?Thanks guys,

newbieTalk



to unsubscribe, go to http://www.yahoogroups.com and follow the instructions

">Yahoo! Terms of Service.



try google for more info, it's a ethernet controller.
-----Original Message-----
From: Paul_Lav [mailto:p...@yahoo.com]
Sent: Friday, August 08, 2003 10:46 AM
To: p...@yahoogroups.com
Subject: Re: [piclist] Connecting RLT8019AS with PIC16F877 - How to start?

What is a RLT8019AS?
----- Original Message -----
From: newbietalk
To: p...@yahoogroups.com
Sent: Friday, August 08, 2003 9:19 AM
Subject: [piclist] Connecting RLT8019AS with PIC16F877 - How to start?

hi,

I'm required to connect a RLT8019AS with a PIC16F877 for my
project, and I'm very new to this.

How do I start? Does the RLT8019AS needed to be programmed by
a programmer? Can I use EEPROM within the PIC16F877 to
initialize RLT8019AS? Is it easier to use jumper mode to
initialize RLT8019AS?Thanks guys,

newbieTalk



to unsubscribe, go to http://www.yahoogroups.com and follow the instructions

">Yahoo! Terms of Service.


to unsubscribe, go to http://www.yahoogroups.com and follow the instructions

">Yahoo! Terms of Service.


hi,

Thanks for the advice, but i must provide ethernet function
without using any device for my uni project.

I'm think of setting the RLT8019AS to the jumper mode, so in
that way i don't need a EEPROM (9346) for software
configuration. Is that true? thank you

--- In , John Remington <jrem123@y...>
wrote:
> ouch, that looks like a lot of work. why not just grab a
device like a
> SitePlayer or similar, and use it for network
communications? They're
> cheap and easy to work with, http:www.siteplayer.com. > --- newbietalk <newbietalk@y...> wrote:
> > hi,
> >
> > I'm required to connect a RLT8019AS with a PIC16F877 for
my
> > project, and I'm very new to this.
> >
> > How do I start? Does the RLT8019AS needed to be programmed
by
> > a programmer? Can I use EEPROM within the PIC16F877 to
> > initialize RLT8019AS? Is it easier to use jumper mode to
> > initialize RLT8019AS?
> >
> >
> > Thanks guys,
> >
> > newbieTalk
> >
> > __________________________________
>




Thanks for the advice, but i must provide ethernet interface without
using any device for my uni project.

i'm think of using the jumper mode for RLT8019AS, in that way, i
don't need a any EEPROM (such as 9346). Is that right?
--- In , John Remington <jrem123@y...> wrote:
> ouch, that looks like a lot of work. why not just grab a device
like a
> SitePlayer or similar, and use it for network communications?
They're
> cheap and easy to work with, http:www.siteplayer.com. > --- newbietalk <newbietalk@y...> wrote:
> > hi,
> >
> > I'm required to connect a RLT8019AS with a PIC16F877 for my
> > project, and I'm very new to this.
> >
> > How do I start? Does the RLT8019AS needed to be programmed by
> > a programmer? Can I use EEPROM within the PIC16F877 to
> > initialize RLT8019AS? Is it easier to use jumper mode to
> > initialize RLT8019AS?
> >
> >
> > Thanks guys,
> >
> > newbieTalk
> >
> > __________________________________
>