Wireless 916MHz with PIC

Started by ramtec73 February 12, 2004
Has anyone tried using a wireless unit such as one from Laipac.com to
send data?

I have bought the 916MHz tx and rx. And trying figure out how to
interface them. The tx section will be run by a 877A. And it is going
to display "Hello World" on the rx end with is connected to a 628.

Thanks
Randy



There's an interesting article at:
http://www.ottawarobotics.org/articles/rf/rf.html

Not the same manufacturer, but probably can use similar techniques

ramtec73 wrote:

> Has anyone tried using a wireless unit such as one from Laipac.com to
> send data?
>
> I have bought the 916MHz tx and rx. And trying figure out how to
> interface them. The tx section will be run by a 877A. And it is going
> to display "Hello World" on the rx end with is connected to a 628.
>
> Thanks
> Randy


Wow, lots coding to it. C. Thanks. But I should also say that I am using the PicBasic Pro to do this. Can anyone explain to me how to use the SERIN and SEROUT. I am guessing I can use this to send  and receive the data to the tx data pin.

----- Original Message -----
From: millerdl
Date: Thu, 12 Feb 2004 18:14:09 -0700
To: p...@yahoogroups.com
Subject: Re: [piclist] Wireless 916MHz with PIC

There's an interesting article at:
http://www.ottawarobotics.org/articles/rf/rf.html

Not the same manufacturer, but probably can use similar techniques

ramtec73 wrote:

> Has anyone tried using a wireless unit such as one from Laipac.com to
> send data?
>
> I have bought the 916MHz tx and rx. And trying figure out how to
> interface them. The tx section will be run by a 877A. And it is going
> to display "He llo World" on the rx end with is connected to a 628.
>
> Thanks
> Randy

--

___________________________________________________________
Sign-up for Ads Free at Mail.com
http://www.mail.com/?sr=signup