The problem is solved!
I used the MPLAB v6.40 "converter" utility to convert an existing
project from
the old '.pjt' format to the new '.mcp' format
and there was some corruption in
the new project file every time. I used the project wizard to
create a new project
and all is well.
Somehow the converted project was forcing MPLAB to assemble in
relocatable
mode. It now assembles in absolute mode and all is well.
Jim
|
MPLAB 6.40 vs MPLAB 5.6x assembler error
Started by ●March 15, 2004
Reply by ●March 18, 20042004-03-18
Reply by ●March 19, 20042004-03-19
----- Original Message ----- From: <> To: <> Sent: Friday, March 19, 2004 3:51 AM Subject: [piclist] Re:MPLAB 6.40 vs MPLAB 5.6x assembler error > The problem is solved! > > I used the MPLAB v6.40 "converter" utility to convert an existing project from > the old '.pjt' format to the new '.mcp' format and there was some corruption > in > the new project file every time. I used the project wizard to create a new > project > and all is well. > > Somehow the converted project was forcing MPLAB to assemble in relocatable > mode. It now assembles in absolute mode and all is well. > > Jim > So my guess that your problem was to do with relocatable mode was correct them. Regards Sergio Masci http://www.xcprod.com/titan/XCSB - optimising structured PIC BASIC compiler |