ICSP Programming CCS

Started by Scott Lingerfelt July 29, 2004

I currently have my hardware setup with ICSP. I use the MCLR, B6, B7 and
connect B3 to ground. I am using the Epic programmer to program my hardware
at this time. Everything works fine.

My question is I have just purchased the CCS compiler and an ICD-40U to use
for programming and debugging. Is there anything different that I need to
do to use the ICD-40U to program my boards using the same ICSP?

I have tried to connect and program one of my boards and I get the error
target hardware not found.

Any suggestions?

Thanks in advance,

Scott Lingerfelt

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004